Liquid-phase-exfoliation technology was utilized to prepare layered , , and nanosheets in cyclohexylpyrrolidone. The nonlinear optical response of these nanosheets in dispersions was investigated by observing spatial self-phase modulation (SSPM) using a 488 nm continuous wave laser beam. The diffraction ring patterns of SSPM were found to be distorted along the vertical direction right after the laser traversing the nanosheet dispersions. The nonlinear refractive index of the three transition metal dichalcogenides dispersions was measured to be , and the third-order nonlinear susceptibility . The relative change of effective nonlinear refractive index of the , , and dispersions can be modulated 0.012–0.240, 0.029–0.154, and 0.091–0.304, respectively, by changing the incident intensities. Our experimental results imply novel potential application of two-dimensional transition metal dichalcogenides in nonlinear phase modulation devices.
A study to analyse beam damage, image quality and edge contrast in the helium ion microscope (HIM) has been undertaken. The sample investigated was graphene. Raman spectroscopy was used to quantify the disorder that can be introduced into the graphene as a function of helium ion dose. The effects of the dose on both freestanding and supported graphene were compared. These doses were then correlated directly to image quality by imaging graphene flakes at high magnification. It was found that a high magnification image with a good signal to noise ratio will introduce very significant sample damage. A safe imaging dose of the order of 1013 He+ cm−2 was established, with both graphene samples becoming highly defective at doses over 5 × 1014 He+ cm−2.The edge contrast of a freestanding graphene flake imaged in the HIM was then compared with the contrast of the same flake observed in a scanning electron microscope and a transmission electron microscope. Very strong edge sensitivity was observed in the HIM. This enhanced edge sensitivity over the other techniques investigated makes the HIM a powerful nanoscale dimensional metrology tool, with the capability of both fabricating and imaging features with sub-nanometre resolution.
1 September 2012 in Composites Science and Technology