27 November 2020 in IEEE Transactions on Instrumentation and Measurement
With the rapid development and explosive application of the Internet of Things (IoT) technology, IoT devices become ubiquitous and indispensable in people’s daily lives. IoT devices with various forms and massive production impose challenges on their over-the-air (OTA) testing. Nowadays, conducting OTA testing in an efficient, reliable, and cost-effective way has become an urgent demand for the IoT industry. Owing to the particular properties (e.g., low cost, high efficiency, and good repeatability) of the reverberation chamber (RC), it has become a popular OTA testing facility. This paper analyzes the statistical uncertainties of two fundamental metrics for IoT devices, i.e., the total radiated power (TRP) and the total isotropic sensitivity (TIS), measured in the RC. Based on the derived probability density functions (PDFs) and associate statistics, a unified approach for uncertainty analyses of TRP and TIS has been proposed, which can greatly facilitate the uncertainty characterizations in the OTA testing.
11 January 2022 in IEEE Transactions on Instrumentation and Measurement
An uncertainty model of total radiated power (TRP) measurements in a reverberation chamber (RC) has been proposed in a previous work, where it was hypothesized that the signal bandwidth had no effect on measurement uncertainty. However, our recent experiments indicate that the signal bandwidth of a long-term evolution (LTE) device indeed affects TRP’s measurement uncertainty. In this article, we investigate the effect of signal bandwidth on TRP tests and improve the uncertainty model to include this effect. It is shown that a larger LTE signal bandwidth helps reducing TRP uncertainty. This phenomenon can be well-captured by the improved uncertainty model, which is further validated by two sets of TRP measurements with different signal bandwidths.
24 February 2021 in IEEE Transactions on Instrumentation and Measurement
Nowadays, wireless devices exhibit an explosive growth trend, which imposes great challenges on over-the-air (OTA) testing. Obviously, the reliability and efficiency of OTA testing have significant influences on the research and development of wireless devices. The reverberation chamber (RC) has become an efficient solution to OTA tests such as total isotropic sensitivity (TIS), especially for large-form-factor devices. In this work, the signal bandwidth (BW) effect on the TIS measurement of a long term evolution (LTE) device is analyzed in a comprehensive way. It is theoretically and experimentally verified that the measurement uncertainty is lower for the case of larger signal BW, and vice versa. This indicates the signal BW effects contribute to the measurement uncertainty and must be considered. The findings of this work allow more flexible and efficient TIS measurements.
10 August 2022 in IEEE Transactions on Instrumentation and Measurement
This article proposes an improved method for total radiated power (TRP) tests based on a numerical integration method called the Clenshaw–Curtis quadrature. It is known that TRP tests in an anechoic chamber need integral calculation of the measured samples. Also, the samples are discretized in the angular domain in practical over-the-air (OTA) testing. By adopting the Clenshaw–Curtis quadrature method to the TRP tests, we can achieve higher accuracy without increasing the number of sampling points or measurement time. Note that the quadrature method must be selected judiciously by considering the practical OTA setting. A numerically accurate quadrature method may not necessarily ensure accurate OTA tests. To illustrate this point, another measurement approach based on a modified Clenshaw–Curtis quadrature method (with even better numerical accuracy) is used for comparison. The proposed method based on the Clenshaw–Curtis quadrature shows superior performance to the conventional and modified approaches. The above findings are verified by both simulation and measurement experiments.
27 March 2023 in IEEE Transactions on Instrumentation and Measurement
Due to the special advantages of the reverberation chamber (RC), it has been recognized as a standardized over-the-air (OTA) testing methodology by the cellular telecommunications industry association (CTIA). Currently, OTA tests of the fifth-generation (5G) wireless terminals are usually performed in different testing environments, e.g., in a reverberation chamber for fast isotropic tests in the sub-6 GHz frequency band, and in an anechoic chamber for directional tests in the millimeter-wave (mm-wave) frequency band, which are inconvenient and costly. In this work, two multi-functional frequency selective absorbers (FSAs) are designed to realize absorption in the 5G mm-wave band and reflection/transmission in the sub-6 GHz band. By loading the FSAs to the RC, an integrated testing environment for 5G terminals can be established. Namely, a quasi-anechoic environment in the mm-wave band and a reverberation environment in the sub-6 GHz band can be simultaneously achieved in the RC loaded with the proposed FSAs. Experimental and simulated results are presented to demonstrate the effectiveness of the proposed scheme.
18 June 2020 in IET Microwaves, Antennas & Propagation
Due to the explosive increase of wireless devices, efficient over‐the‐air testing of such devices is highly desirable. The reverberation chamber (RC) offers efficient and cost‐effective means to determine performance metrics of wireless devices, such as total radiated power (TRP). In this study, the distribution of the measured TRP in an RC is analytically derived, based on which the statistics (i.e. mean, variance) of the measured TRP are derived as well. RC measurements have been performed to verify the analytically derived statistics.