Anastasiia Liashko

Anastasiia Liashko

Auto-generated profile, based on publicly available information

Anastasiia Liashko

National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 August 2023 in Archive of Mechanical Engineering
Verified
Journal Article
Closed access
PDF file
VLViacheslav Loveikin
Viacheslav Loveikin
YRYuriy Romasevych
Yuriy Romasevych
ALAndrii Loveilin
Andrii Loveilin
MKMykola Korobko
Mykola Korobko
ALAnastasia Liashko
Anastasia Liashko
In the present study, the problem of optimization of the motion mode of the tower crane's slewing mechanism in the steady-state mode of trolley movement is stated and solved. An optimization criterion, which includes the RMS values of the drive torque and the rate of its change over time, is minimized. The optimization is carried out taking into account the drive torque constraints, and under the specified boundary conditions of motion. Three optimization problems at different values of the weight coefficients are solved. In the first problem, priority is given to the drive torque, in the third – to the rate of the drive torque change, and in the second problem, the significance of both components is assumed equal. The optimization problems are nonlinear, thus a VСT-PSO method is applied to solve them. The obtained optimal start-up modes of the crane slewing mechanism eliminate pendulum load oscillations and high-frequency elastic oscillations of the tower. Most of the kinematic, dynamical, and power parameters at different values of the weight coefficients are quite close to each other. It indicates that the optimal modes of motion are significantly influenced by the boundary conditions, optimization parameters, and constraints

11 November 2022 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
VLViacheslav Loveikin
Viacheslav Loveikin
YRYurii Romasevych
Yurii Romasevych
ALAndrii Loveikin
Andrii Loveikin
ALAnastasiia Liashko
Anastasiia Liashko
KPKostiantyn Pochka
Kostiantyn Pochka
MBMaksym Balaka
Maksym Balaka
The variational problem of the movement mode selection for the load outreach change mechanism during a steady-state tower crane slewing was formulated and solved in the paper, that ensures the minimization of the drive motor power. We used a dynamic model of the outreach change mechanism for research work, which presented the mechanical system with three degrees of freedom. The formulated variational problem is nonlinear, and so we used the modified PSO-Rot-Ring particle swarm metaheuristic method for its solution. The analytical solution of another variational problem for the same model of the crane mechanism and an optimization criterion close in physical content was used as the solution initial approximation of the nonlinear variational problem to save calculated resources. The starting mode of the mechanism drive for the load outreach change was determined during the solution of the nonlinear variational problem, which ensures the root-mean-square value minimization of the drive motor power. Low- and high-frequency oscillations of the outreach change mechanism elements during the start-up were detected in the optimization process. The first oscillations are caused by the load rocking on the flexible suspension during the start-up, and the second – by the nature of the change in the driving moment and drive power. These oscillations are eliminated in the section of steady-state movement due to the selection of the motion boundary conditions, which are taken into account in the solution process of the variational problem.

29 November 2024 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
VLViacheslav Loveikin
Viacheslav Loveikin
YRYurii Romasevych
Yurii Romasevych
ALAndrii Loveikin
Andrii Loveikin
ALAnastasiia Liashko
Anastasiia Liashko
KPKostiantyn Pochka
Kostiantyn Pochka
Combining the work of individual mechanisms is carried out to improve the productivity of jib cranes. In particular, the task of joint starting of hoisting mechanisms of jib and cargo is considered in this article. Dynamic loads on crane structural elements, drives, and cargo on a flexible suspension increase with such movement of mechanisms. Increased loads lead to a decrease in the reliability of the crane and an increase in energy costs. When researching the dynamics of the joint starting of hoisting mechanisms of jib and cargo, the jibs system is represented by a mechanical system with four degrees of freedom, which takes into account the main movement of the mechanisms and the oscillatory movement of links with elastic and dissipative properties, as well as the cargo on a flexible suspension in the plane of departure change. A mathematical model of the joint movement of hoisting mechanisms of the jib and cargo was built for such a dynamic model of the boom system of the crane. The obtained model is a system of nonlinear differential equations of the second order, the solution of which was carried out by a numerical method in the form of a computer program. The dynamic of the joint starting of the hoisting mechanisms of the jib and cargo in the jib crane with specific numerical parameters were calculated and studied based on the developed program. The performed calculation made it possible to conduct a dynamic analysis of the joint starting of the hoisting mechanisms. High-frequency oscillations of links with elastic and dissipative properties in the drive of the hoisting mechanism were found as a result of the analysis. Also, low-frequency vibrations of the load on the flexible suspension were found. In the process of starting the mechanisms, high-frequency oscillations are attenuated during the transition process, and low-frequency oscillations of the load are sufficiently long and are attenuated during a significant period. It is recommended to optimize the starting and braking modes to improve the dynamic properties of the hoisting mechanisms of the jib and cargo during their joint movement.

26 June 2023 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
VLVyacheslav Loveikin
Vyacheslav Loveikin
YRYuriy Romasevych
Yuriy Romasevych
ALAndriy Loveikin
Andriy Loveikin
ALAnastasiya Liashko
Anastasiya Liashko
KPKostyantyn Pochka
Kostyantyn Pochka
MKMykola Korobko
Mykola Korobko
The variational problem of the movement mode selection for the load outreach change mechanism during a steady-state tower crane slewing was formulated and solved in the paper, that ensures the minimization of the drive motor power. The variational problem is nonlinear, and so we used the modified PSO-Rot-Ring particle swarm met heuristic method for its solution. Low- and high-frequency oscillations of the outreach change mechanism elements during the start-up were detected in the optimization process. These oscillations are eliminated in the section of steady-state movement due to the selection of the motion boundary conditions. In order to increase the productivity during a tower crane exploitation the overlapping of the mechanisms operation is used. The article considers the overlapping of operations of the derriking and slewing mechanisms of the crane. To study the dynamic processes in the joint work of the derriking and slewing of the tower crane, a dynamic model was built. It takes into account the main movement of the derriking and slewing of the crane, as well as oscillation processes in the drive mechanisms and load oscillation on flexible suspension in two planes: in the plane of the derrikingand in the plane of slewing of the crane. The developed dynamic model takes into account the elastic-dissipative characteristics of the transfer mechanisms, as well as the dynamic mechanical characteristics of the drive motors, which describe the transient electromagnetic processes. On the basis of the developed dynamic model with the help of Lagrangeʼs equations six differential equations of the second order which describe a mechanical part of the mechanisms movement were found. In addition, the transient dynamic electromagnetic processes of each of the engines are described by four differential equations. As a result, a system of fourteen differential equations was obtained. It describes the common dynamics of the mechanical part of the crane mechanisms and electromagnetic processes in the electric engines of the derriking and slewing mechanisms. The obtained system of differential equations was solved by numerical methods with the help of developed computer program. For the actual construction of the tower crane in the overlapping work of the derriking and slewing mechanisms, kinematic, power, and energy characteristics were determined, which made it possible to estimate the actual loads in the elements of the construction and drive mechanisms. From the obtained results it was established that the elements of the construction and drive mechanisms are under significant dynamic and energy overloads.High-frequency oscillations of drive mechanisms at the beginning of the movement and low-frequency oscillations of elements of the construction and load were revealed. This significantly reduces the reliability of tower cranes, increases their energy losses, and affects the work of the crane operator and maintenance staff.

28 May 2026 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
VLViacheslav Loveikin
Viacheslav Loveikin
YRYurii Romasevych
Yurii Romasevych
KPKostiantyn Pochka
Kostiantyn Pochka
OSOleksii Stekhno
Oleksii Stekhno
ALAnastasiia Liashko
Anastasiia Liashko
A comparative analysis of the optimal starting mode of the tower crane slewing mechanism in terms of speed under asymmetric (task 1) and symmetric (task 2) constraints on optimal control is presented in a scientific article. A two-mass dynamic model was used for the research, whose motion in time is described by a system of two second-order differential equations. In the course of further research, the system of two second-order differential equations was reduced to a single fourth-order differential equation. After performing the appropriate transformations, the fourth-order differential equation was presented in Cauchy form and the initial and final conditions of motion were given, under which the load oscillations will be eliminated after the turning mechanism reaches a steady speed.The optimisation task itself was reduced to the task of unconditional minimisation of a complex integral-terminal functional, where the terminal component is responsible for the fulfilment of the final boundary conditions, and the integral component is responsible for the speed of the mechanism. A series of 54 experimental studies (27 for each of the tasks under investigation) was planned, in which the independent factors were the length of the flexible suspension (which was 10, 15 and 20 metres), the load projection (which was 5, 15 and 20 m), and the load mass (which was 500, 2000 and 5000 kg).During the theoretical studies, the main assessment was carried out according to the following indicators: the duration of the system acceleration to the steady-state speed value; the maximum deviation of the flexible suspension of the load from the vertical; the maximum and root mean square values of the power in the drive and the acceleration of the load.The results of the analysis showed that when using asymmetric constraints for optimal control (task 1), the acceleration time of the studied system to a steady state speed increases compared to symmetric constraints (task 2) in the range from 1.23 to 15. 28 %, and the maximum values of kinematic characteristics decrease from 5.46 to 42.85 % and energy indicators from 0.48 to 27.83 %.

30 October 2025 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
VLViacheslav Loveikin
Viacheslav Loveikin
YRYurii Romasevych
Yurii Romasevych
YLYurii Loveikin
Yurii Loveikin
ALAnastasiia Liashko
Anastasiia Liashko
KPKostiantyn Pochka
Kostiantyn Pochka
The efficiency of jib cranes largely depends on increasing their productivity when performing loading, unloading, and installation operations. The simultaneous operation of individual mechanisms increases the productivity of jib cranes. The purpose of this study is to construct a mathematical model and perform a dynamic analysis of the crane jib system during the simultaneous operation of the jib lifting and crane turning mechanisms. The presented research is based on methods for constructing discrete dynamic models of a jib crane using second-order Lagrange equations, numerical methods for solving nonlinear ordinary differential equations, which are presented in the form of a computer program, and methods for dynamic analysis of the simultaneous motion of crane mechanisms. The problem of the dynamics of simultaneous motion of the jib lifting and crane turning mechanisms is solved in this article. The crane jib system is represented by a dynamic model with four degrees of freedom, which considers the main motion of the jib lifting and crane turning mechanisms and the oscillation of the cargo on a flexible suspension. As a result of the dynamic analysis, the kinematic, dynamic, and energy characteristics of individual links of the crane jib system are determined during the simultaneous operation of the jib lifting and crane turning mechanisms. The main movement of the drive mechanisms for lifting the jib and crane turning, as well as the low-frequency spatial oscillations of the cargo on a flexible suspension, were investigated. It has been established that the dynamic motion of the mechanisms depends on the character of the change in the driving forces of the drives. Low-frequency oscillations of the cargo on a flexible suspension practically do not dampen and continue throughout the entire movement cycle. To improve the dynamics of simultaneous motion of mechanisms and minimise oscillatory processes of the jib system links, it is recommended to select modes of smooth change of driving forces of drives in transition processes (starting, braking), which ensure the desired movement of executive mechanisms and lead to a reduction in loads.