6 June 2016 in IEEE Transactions on Instrumentation and Measurement
Core diameter mismatch structures are proposed and experimentally investigated for curvature and vibration sensing. Two configurations are suggested, one approach uses a structure formed by splicing an uncoated short section of multimode fiber between two standard single-mode fibers (SMFs) single-mode-multimode-single-mode (SMS), combined to a fiber optical mirror at its end, and the other approach uses a structure made by splicing a section of SMF between two multimode fibers (SMSMS). In the curvature analysis, the proposed SMS sensor generates the destructive interference patterns when it is bent, varying only the attenuation of the optical signal without wavelength shifts. The SMSMS vibration sensor proved to be suitable to monitor very low frequencies such as 0.1 Hz. The configuration of the proposed sensors presents several interesting features, such as easy fabrication, low cost, high efficiency, and high sensitivity. These advantages make such sensors very useful in a wide range of applications, for instance, structural health monitoring.
27 March 2015 in Microwave and Optical Technology Letters
In this work, it is proposed a technique to implement an intensity sensor based on the generation of a double-reflecting (ghost) signal in optical time domain reflectometry (OTDR). The intensity sensor is supported by a singlemode-multimode-singlemode (SMS) fiber structure combined with a fiber loop mirror (FLM). The results of the displacement sensitivity show linear behavior for both the first-reflecting and double-reflecting signals with linear slopes of approximately −4.5 dB/mm and −6 dB/mm, respectively. The displacement resolution achieved is ∼0.28 mm. It is also found that the system is able to read periodic displacement variations in the millisecond time scale applied to the sensing head. © 2015 Wiley Periodicals, Inc. Microwave Opt Technol Lett 57:1312–1315, 2015