26 March 2015 in IEEE Transactions on Power Electronics
This paper presents a comprehensive short-circuit ruggedness evaluation and numerical investigation of up-to-date commercial silicon carbide (SiC) MOSFETs. The short-circuit capability of three types of commercial 1200-V SiC MOSFETs is tested under various conditions, with case temperatures from 25 to 200 °C and dc bus voltages from 400 to 750 V. It is found that the commercial SiC MOSFETs can withstand short-circuit current for only several microseconds with a dc bus voltage of 750 V and case temperature of 200 °C. The experimental short-circuit behaviors are compared, and analyzed through numerical thermal dynamic simulation. Specifically, an electrothermal model is built to estimate the device internal temperature distribution, considering the temperature-dependent thermal properties of SiC material. Based on the temperature information, a leakage current model is derived to calculate the main leakage current components (i.e., thermal, diffusion, and avalanche generation currents). Numerical results show that the short-circuit failure mechanisms of SiC MOSFETs can be thermal generation current induced thermal runaway or high-temperature-related gate oxide damage.
1 May 2014 in IEEE Transactions on Power Electronics
A thermally integrated packaging structure for an all silicon carbide (SiC) power module was used to realize highly efficient cooling of power semiconductor devices through direct bonding of the power stage and a cold baseplate. The prototype power modules composed of SiC metal-oxide-semiconductor field-effect transistors and Schottky barrier diodes demonstrate significant improvements such as low-power losses and low-thermal resistance. Direct comparisons to their silicon counterparts, which are composed of insulated gate bipolar transistors and PiN diodes, as well as conventional thermal packaging, were experimentally performed. The advantages of this SiC module in efficiency and power density for power electronics systems have also been identified, with clarification of the SiC attributes and packaging advancements.
30 April 2014 in IEEE Transactions on Power Electronics
This paper presents a board-level integrated silicon carbide (SiC) mosfet power module for high temperature and high power density application. Specifically, a silicon-on-insulator (SOI)-based gate driver capable of operating at 200 °C ambient temperature is designed and fabricated. The sourcing and sinking current capability of the gate driver are tested under various ambient temperatures. Also, a 1200 V/100 A SiC mosfet phase-leg power module is developed utilizing high temperature packaging technologies. The static characteristics, switching performance, and short-circuit behavior of the fabricated power module are fully evaluated at different temperatures. Moreover, a buck converter prototype composed of the SOI gate driver and SiC power module is built for high temperature continuous operation. The converter is operated at different switching frequencies up to 100 kHz, with its junction temperature monitored by a thermosensitive electrical parameter and compared with thermal simulation results. The experimental results from the continuous operation demonstrate the high temperature capability of the power module at a junction temperature greater than 225 °C.
18 March 2014 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A multilayer planar interconnection structure was used for the packaging of liquid-cooled automotive power modules. The power semiconductor switch dies are sandwiched between two symmetric substrates, providing planar electrical interconnections and insulation. Two minicoolers are directly bonded to the outside of these substrates, allowing double-sided, integrated cooling. The power switch dies are orientated in a face-up/face-down 3-D interconnection configuration to form a phase leg. The bonding areas between the dies and substrates, and the substrates and coolers are designed to use identical materials and are formed in one heating process. A special packaging process has been developed so that high-efficiency production can be implemented. Incorporating high-efficiency cooling and low-loss electrical interconnections allows dramatic improvements in systems' cost, and electrical conversion efficiency. These features are demonstrated in a planar bond-packaged prototype of a 200 A/1200 V phase-leg power module made of silicon (Si) insulated gate bipolar transistor and PiN diodes.
1 May 2013 in IEEE Transactions on Power Electronics
In order to satisfy the high-density requirement and harsh thermal conditions while reducing cost in future electric and hybrid electric vehicles (HEV), a systematic study of a 1200-V trench-gate field-stop Si insulated gate bipolar transistor (IGBT) operating up to 200°C is performed to determine its feasibility, issues, and application guideline. The device forward conduction characteristics, leakage current, and switching performance are evaluated at various temperatures. Based on the device characterization, the impact of the increased junction temperature on a traction drive converter loss and thermal management is analyzed. It is shown that by extending the device junction temperature to 200°C, the additional 65°C coolant loop can be eliminated without compromising power density and thermal management design. Furthermore, the possible failure mechanisms including latching, short circuit fault, and avalanche capability are tested at elevated temperatures. The criteria considering thermal stability, thermal management, short circuit capability, and avalanche capability are given at 200°C to ensure the safe and reliable operation of Si IGBTs.