Puqi Ning

Dr. Puqi Ning


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 March 2010 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
PNPuqi Ning
Puqi Ning
TLThomas Guangyin Lei
Thomas Guangyin Lei
FWFei Wang
Fei Wang
GLGuoquan Lu
Guoquan Lu
KNKhai D. T. Ngo
Khai D. T. Ngo
KRKaushik Rajashekara
Kaushik Rajashekara
This paper presents the design, development, and testing of a phase-leg power module packaged by a novel planar packaging technique for high-temperature (250°C) operation. The nanosilver paste is chosen as the die-attach material as well as playing the key functions of electrically connecting the devices' pads. The electrical characteristics of the SiC-based power semiconductors, SiC JFETs, and SiC Schottky diodes have been measured and compared before and after packaging. No significant changes (<;5%) are found in the characteristics of all the devices. Prototype module is fabricated and operated up to 400 V, 1.4 kW at junction temperature of 250°C in the continuous power test. Thermomechanical robustness has also been investigated by passive thermal cycling of the module from -55°C to 250°C. Electrical and mechanical performances of the packaged module are characterized and considered to be reliable for at least 200 cycles.

18 March 2014 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
ZLZhenxian Liang
Zhenxian Liang
PNPuqi Ning
Puqi Ning
FWFred Wang
Fred Wang
LMLaura Marlino
Laura Marlino
A multilayer planar interconnection structure was used for the packaging of liquid-cooled automotive power modules. The power semiconductor switch dies are sandwiched between two symmetric substrates, providing planar electrical interconnections and insulation. Two minicoolers are directly bonded to the outside of these substrates, allowing double-sided, integrated cooling. The power switch dies are orientated in a face-up/face-down 3-D interconnection configuration to form a phase leg. The bonding areas between the dies and substrates, and the substrates and coolers are designed to use identical materials and are formed in one heating process. A special packaging process has been developed so that high-efficiency production can be implemented. Incorporating high-efficiency cooling and low-loss electrical interconnections allows dramatic improvements in systems' cost, and electrical conversion efficiency. These features are demonstrated in a planar bond-packaged prototype of a 200 A/1200 V phase-leg power module made of silicon (Si) insulated gate bipolar transistor and PiN diodes.

8 November 2013 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
PNPuqi Ning
Puqi Ning
FWFei Wang
Fei Wang
DZDi Zhang
Di Zhang
A high temperature wirebond-packaged phase-leg power module was designed, developed, and tested. Details of the layout, gate drive, and cooling system designs are described. Continuous power tests confirmed that the designed high-density power module can be successfully operated with 250 °C junction temperature. The power module was further utilized in an all-SiC rectifier system that achieves a 2.78 kW/lb power density.

19 November 2020 in Journal of Power Electronics
Verified
Journal Article
Closed access
PDF file
HCHan Cao
Han Cao
PNPuqi Ning
Puqi Ning
XCXiaoguang Chai
Xiaoguang Chai
DZDan Zheng
Dan Zheng
YKYuhui Kang
Yuhui Kang
XWXuhui Wen
Xuhui Wen

16 August 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
XHXiaoshuang Hui
Xiaoshuang Hui
PNPuqi Ning
Puqi Ning
TFTao Fan
Tao Fan
YKYuhui Kang
Yuhui Kang
KWKai Wang
Kai Wang
YMYunhui Mei
Yunhui Mei
To meet stringent performance of electric vehicle controllers, it is highly needed to optimize the electrical and thermal performance for power semiconductor modules. As stacked DBC (Direct Bonded Copper) power modules have higher power density and enable the parallel of more chips, the demand for optimization is increasingly imperative. In this paper, an automated optimization method based on GA (genetic algorithm) and LBM (lattice Boltzmann method) was proposed for stacked DBC power modules with water-cooled PinFin heatsink. With proposed automatic generation method for electrical layout and heatsink structures, GA is used to select candidates. Because of the expanded optimization space, there is a growing requirement for faster and more precise evaluation methods. The proposed evaluation method based on LBM can assess layout parasitic inductance and the flow velocity and temperature distribution of power module with PinFin heatsink, which verifies an advantage in balancing speed and accuracy compared to traditional evaluation methods. According to optimization results, a 1200 V/ 1400 A, 16 chips in parallel, SiC MOSFET power module was fabricated in a standard EconoDUAL packaging size. Dynamic and static parameter testing as well as thermal testing were conducted, and experiment results demonstrate the effectiveness of proposed automatic optimization method.

30 September 2019 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
HCHan Cao
Han Cao
PNPuqi Ning
Puqi Ning
XWXuhui Wen
Xuhui Wen
TYTianshu Yuan
Tianshu Yuan
HLHuakang Li
Huakang Li
In this paper, a practical electro-thermal SPICE model is proposed based on Finite Differential Method. Other than the conventional Fourier model and the Hefner model, the excess carriers distribution can be solved accurately by a Finite Differen-tial Method in SPICE simulation tool. In this method, the electro-thermal behavior of the device is modeled using a semi-mathe-matic model. In order to verify the modeling results, a self-pack-aging IGBT module is tested in both static characteristics and dy-namic characteristics and the simulation results of presented model fits well with the experimental results under different junc-tion temperatures. More importantly, the Finite Differential Method provided in this paper is an approach for modelling bipo-lar devices, it can also be applied to modelling Wide Bandgap De-vices, such as SiC IGBT and SiC BJT.