27 October 2021 in IEEE Transactions on Geoscience and Remote Sensing
Oil spills in the Arctic are becoming more likely as shipping traffic increases in response to climate-related sea ice loss. To improve oil spill detection capability, we used a controlled mesocosm to analyze the multipolarized C-band backscatter response of oil in newly formed sea ice (NI). Artificial sea ice was grown in two cylindrical tubs at the Sea-ice Environmental Research Facility, University of Manitoba. The sea ice physical characteristics, including surface roughness, thickness, temperature, and salinity, were measured before and after oil injection below the ice sheet. Time-series C-band radar backscatter measurements detected the differences in the sea ice evolution and oil migration to the sea ice surface in the oil-contaminated tub, which was compared to uncontaminated ice in a control tub. Immediately prior to the presence of oil on the ice surface, the copolarized backscatter is increased by 13-dB local maximum, while the cross-polarized backscatter is decreased by 9-dB. Ice physical properties suggest that the local backscatter maximum and minimum, which occurred immediately before oil migrated onto the surface, were related to a combination of brine and oil upward migration. The findings of this work provide a baseline data interpretation for oil detection in the Arctic Ocean using current and future C-band multipolarization radar satellites.
28 March 2022 in IEEE Transactions on Antennas and Propagation
We present two designs that improve the gain and cross-polarization performance of the waveguide-fed short backfire (SBF) antenna by introducing a choke (SBF-2) and by loading the cavity with a metallic ring feature (SBF-2-Ring). A series of parametric simulation studies on antenna dimensions provides information on how to improve the antenna gain and cross-polarization performance while simultaneously extending the impedance bandwidth. For SBF-2, the peak gain was 16.6 dBi, the minimum cross-polarization ratio was −23.8 dB, and the maximum impedance bandwidth was 27.3%, with a gain bandwidth of 19.2%. For SBF-2-Ring, the peak gain was 15.8 dBi, the minimum cross-polarization ratio was −29.1 dB, and the maximum impedance bandwidth was 43.5%, with a gain bandwidth of 31.8%. The concepts were verified by designing, fabricating, and testing two prototypes in the microwave C-band. Excellent agreement between simulation and measurement was achieved. The measured gain for SBF-2-Ring was >14 dBi for 4.7–6.2 GHz and the worst case cross polarization in the diagonal plane was $< -22$ dB for 5.3–5.8 GHz. Cross-polarization in the principal planes has significantly greater bandwidth and the worst case analysis is presented to give limitations on the performance.