Although sodium‐ion batteries (SIBs) offer promising low‐cost alternatives to lithium‐ion batteries (LIBs), several challenges need to be overcome for their widespread adoption. A primary concern is the optimization of carbon anodes. Graphite, vital to the commercial viability of LIBs, has a limited capacity for sodium ions. Numerous alternatives to graphite are explored, particularly focusing on disordered carbons, including hard carbon. However, compared with graphite, most of these materials underperform in LIBs. Furthermore, the reaction mechanism between carbon and sodium ions remains ambiguous owing to the structural diversity of disordered carbon. A straightforward mechanical approach is introduced to enhance the sodium ion storage capacity of graphite, supported by comprehensive analytical techniques. Mechanically activated graphite delivers a notable reversible capacity of 290.5 mAh·g−1 at a current density of 10 mA·g−1. Moreover, it maintains a capacity of 157.7 mAh·g−1 even at a current density of 1 A·g−1, benefiting from the defect‐rich structure achieved by mechanical activation. Soft X‐ray analysis revealed that this defect‐rich carbon employs a sodium‐ion storage mechanism distinct from that of hard carbon. This leads to an unexpected reversible reaction on the solid electrolyte surface. These insights pave the way for innovative design approaches for carbon electrodes in SIB anodes.
The Stöber synthesis, which is composed of two steps of the formation of RF resin spheres in presence of an NH3 catalyst and the carbonization of RF resin spheres under an inert atmosphere, is a well-known approach to the preparation of carbon spheres (CSs). We herein modified the first step of the Stöber procedure to introduce morphological and physicochemical changes to CSs. Two different fully perforated 3D carbon-based micromaterials were prepared, namely spherical meso-perforated carbon (SSMPC) and apple-shaped meso-perforated carbon (ASMPC). In the preparation of these materials, we adopted colloidal silica-mediated spray drying method followed by carbonization and silica removal. High specific surface areas and pore volumes were achieved for both ASMPC (1141 m2 g−1 and 3.2 cm3 g−1) and SSMPC (1050 m2 g−1 and 2.1 cm3 g−1). We then evaluated the charge storage properties in organic media from supercapacitor (SC) as well as Li-ion battery (LIB) perspectives. An ASMPC-based symmetric SC was capable of delivering a specific capacitance and energy density of 260 F g−1 and 75.56 W h kg−1, respectively, in addition to an excellent cyclability of 30 000 cycles. In the LIB, ASMPC exhibited a maximum capacity of 1698 mA h g−1 after 175 cycles at 200 mA g−1. We systematically elaborated that inaccessible interior sites of the 3D CSs could become accessible through the introduction of meso-perforations on the periphery and in the interior. We expected that the 3D shape and meso-perforations were responsible for the exceptional performance of CSs in SCs and LIBs.
Solid electrolytes face challenges in solid‐state sodium batteries (SSSBs) because of limited ionic conductivity, increased interfacial resistance, and sodium dendrite issues. In this study, we adopted a unique Sn4+ doping strategy for Na3.2Zr2Si2.2P0.8O12 (NZSP) that caused a partial structural transition from the monoclinic (C2/c) phase to the rhombohedral (R‐3c) phase in Na3.2Zr1.9Sn0.1Si2.2P0.8O12 (NZSnSP1). X‐ray diffraction (XRD) patterns and high‐resolution transmission electron microscopy analyses were used to confirm this transition, where rhombohedral NZSnSP1 showed an increase in the Na2–O bond length compared with monoclinic NZSnSP1, increasing its triangular bottleneck areas and noticeably enhancing Na+ ionic conductivity, a higher Na transference number, and lower electronic conductivity. NZSnSP1 also showed exceptionally high compatibility with Na metal with an increased critical current density, as evidenced by symmetric cell tests. The SSSB, fabricated using Na0.9Zn0.22Fe0.3Mn0.48O2 (NZFMO), Na metal, and NZSnSP1 as the cathode, anode, and the solid electrolyte and separator, respectively, maintains 65.86% of retention in the reversible capacity over 300 cycles within a voltage range of 2.0–4.0 V at 25°C at 0.1 C. The in‐situ X‐ray diffraction and X‐ray absorption analyses of the P and Zr K‐edges confirmed that NZSnSP1 remained highly stable before and after electrochemical cycling. This crystal structure modification strategy enables the synthesis of ideal solid electrolytes for practical SSSBs.