3 December 2021 in IEEE Access
The increased addition of DERs, their intermittent nature, and the high cost of ESSs are the key hurdles for interconnected multi-microgrids to operate economically. It is important to have a system that is simple to adopt, computationally inexpensive, does not share private data. In this paper, an energy management scheme is proposed for multiple interconnected renewable energy resources within the multi-microgrid paradigm. The core objectives aimed at minimizing the operational cost of each microgrid and utilize RER most economically without any load interruptions. The proposed scheme is performed in two steps. In the first step, the load is shifted in accordance with the daily price curve via resource scheduling i.e., charging and discharging of battery storage, day-ahead forecast of RER generation, and respective loads. In the second stage, the cost of energy is further reduced using opportunistic trading with neighboring microgrids in real-time. The mismatch between forecasted generation and load is also adjusted via either energy trading or with efficient scheduling of available power that is stored during off-peak hours. The effectiveness of the proposed scheme is applied to a test system consisting of four interconnected microgrids. Results indicate that daily average power imported from the utility grid and peak demand is changed from 103 kW to 162 kW, and from 661 kW to 527 kW, respectively. Likewise, as per comparison, significantly favorable results have been achieved in terms of efficient available resources utilization, market trading, and reduction of the respective bills.
30 May 2025 in Chemical Engineering Journal
11 March 2025 in Carbon Energy
Solid electrolytes face challenges in solid‐state sodium batteries (SSSBs) because of limited ionic conductivity, increased interfacial resistance, and sodium dendrite issues. In this study, we adopted a unique Sn4+ doping strategy for Na3.2Zr2Si2.2P0.8O12 (NZSP) that caused a partial structural transition from the monoclinic (C2/c) phase to the rhombohedral (R‐3c) phase in Na3.2Zr1.9Sn0.1Si2.2P0.8O12 (NZSnSP1). X‐ray diffraction (XRD) patterns and high‐resolution transmission electron microscopy analyses were used to confirm this transition, where rhombohedral NZSnSP1 showed an increase in the Na2–O bond length compared with monoclinic NZSnSP1, increasing its triangular bottleneck areas and noticeably enhancing Na+ ionic conductivity, a higher Na transference number, and lower electronic conductivity. NZSnSP1 also showed exceptionally high compatibility with Na metal with an increased critical current density, as evidenced by symmetric cell tests. The SSSB, fabricated using Na0.9Zn0.22Fe0.3Mn0.48O2 (NZFMO), Na metal, and NZSnSP1 as the cathode, anode, and the solid electrolyte and separator, respectively, maintains 65.86% of retention in the reversible capacity over 300 cycles within a voltage range of 2.0–4.0 V at 25°C at 0.1 C. The in‐situ X‐ray diffraction and X‐ray absorption analyses of the P and Zr K‐edges confirmed that NZSnSP1 remained highly stable before and after electrochemical cycling. This crystal structure modification strategy enables the synthesis of ideal solid electrolytes for practical SSSBs.
3 January 2025 in Carbon Energy
Sodium‐ion batteries (SIBs) employ P2‐type layered transition metal oxides as promising cathode materials, primarily due to their abundant natural reserves and environmentally friendly characteristics. However, structural instability and complex phase transitions during electrochemical cycling pose significant challenges to their practical applications. Employing cation substitution serves as a straightforward yet effective strategy for stabilizing the structure and improving the kinetics of the active material. In this study, we introduce a Ni‐rich honeycomb‐layered Na2+xNi2TeO6 (NNTO) cathode material with variable sodium content (x = 0, 0.03, 0.05, 0.10). Physicochemical characterizations reveal that excess sodium content at the atomic scale modifies the surface and suppresses phase transitions, while preserving the crystal structure. This results in enhanced cyclic performance and improved electrochemical kinetics at room temperature. Furthermore, we investigate the performance of the NNTO cathode material containing 10% excess sodium at a relatively high temperature of 60°C, where it exhibits 71.6% capacity retention compared to 60% for the pristine. Overall, our results confirm that a preconstructed surface layer (induced by excess sodium) effectively safeguards the Ni‐based cathode material from surface degradation and phase transitions during the electrochemical processes, thus exhibiting superior capacity retention relative to the pristine NNTO cathode. This study of the correlation between structure and performance can potentially be applied to the commercialization of SIBs.
23 August 2023 in Sustainable Energy, Grids and Networks