18 September 2018 in Faraday Discussions
We compare SiO x and HfO 2 ReRAM technologies with fixed C and Ti electrodes to understand the role played by the switching layer.
6 December 2017 in IEEE Transactions on Electron Devices
The cross-point architecture for memory arrays is widely considered as one of the most attractive solutions for storage and memory circuits thanks to simplicity, scalability, small cell size, and consequently high density and low cost. Cost-scalable vertical 3-D cross-point architectures, in particular, offer the opportunity to challenge Flash memory with comparable density and cost. To develop scalable cross-point arrays, however, select devices with sufficient ON-OFF ratio, current capability, and endurance must be available. This paper presents a select device technology based on volatile resistive switching with Cu and Ag top electrode and silicon oxide (SiOx) switching materials. The select device displays ultrahigh resistance window and good current capability exceeding 2 MAcm -2 . Retention study shows a stochastic voltage-dependent ON-OFF transition time in the 10 μs -1 ms range, which needs to be further optimized for fast memory operation in storage class memory arrays.
18 May 2020 in IEEE Transactions on Electron Devices
In-memory computing (IMC) with cross-point resistive memory arrays has been shown to accelerate data-centric computations, such as the training and inference of deep neural networks, due to the high parallelism endowed by physical rules in the electrical circuits. By connecting cross-point arrays with negative feedback amplifiers, it is possible to solve linear algebraic problems, such as linear systems and matrix eigenvectors in just one step. Based on the theory of feedback circuits, we study the dynamics of the solution of linear systems within a memory array, showing that the time complexity of the solution is free of any direct dependence on the problem size N, rather it is governed by the minimal eigenvalue of an associated matrix of the coefficient matrix. We show that when the linear system is modeled by a covariance matrix, the time complexity is O(logN) or O(1). In the case of sparse positive-definite linear systems, the time complexity is solely determined by the minimal eigenvalue of the coefficient matrix. These results demonstrate the high speed of the circuit for solving linear systems in a wide range of applications, thus supporting IMC as a strong candidate for future big data and machine learning accelerators.
4 February 2020 in IEEE Transactions on Electron Devices
In-memory computing with cross-point arrays of resistive memory is a promising technique for typical tasks, such as the training and inference of deep learning. Recently, it has been shown that a cross-point array of resistive switching memory (RRAM) with a feedback configuration can be used to solve linear systems, compute eigenvectors, and rank webpages in just one step. Here, we demonstrate the PageRank with a real data set (the Harvard500) and an eight-level RRAM model, describing the conductance update, the standard deviation of each level, and the conductance ratio. By carefully placing each memory conductance value via a program-verify technique, we show that an accuracy of 95% can be achieved for the ranking result. The equivalent throughput of the eigenvector circuit for PageRank is estimated to be 0.183 tera-operations per second (TOPS), while the energy efficiency is 362 TOPS/W. This article supports the feasibility of in-memory PageRank with significant improvements in speed and energy efficiency for practical big-data tasks.