21 February 2025 in Fire and Materials
11 September 2023 in Journal of Thermal Analysis and Calorimetry
In technical terms, wood is a natural composite material with a polymer matrix, reinforced with fibres made of uniaxially oriented longitudinal cells. Due to the ease of obtaining and relatively low technological requirements related to its processing, wood is a common material used for various types of construction materials. An experimental investigation was carried out to determine the evolution of the ignition sensitivity and the explosion of three types of softwood dusts. Two of those dusts come from conifers and one from a deciduous tree. Complete fire characteristic requires several parameters describing wood dust behaviour under fire conditions including heat release rate (HRR), ignition time, or fire growth index. To determine those parameters, a cone calorimeter was used. Explosion characteristic was tested for representative wood as a dust sample in 20-L spherical vessel. Minimum ignition energy (MIE) was tested on MINOR II apparatus, which is a modified Hartman’s tube. Minimum ignition temperatures were tested with the use of layer ignition temperature apparatus and Godbert–Greenwald apparatus for minimum ignition temperature of a dust layer and dust cloud (MIT), respectively. Dust with the highest KST value, lowest MIE in the widest concentration range, and lowest MIT was pine wood dust. It also shows the shortest ignition time and a timespan between ignition and HRR peak.
19 April 2023 in Journal of Fire Sciences
Wood dust consists of the fine particles of wood that are produced when wood is processed. It is considered explosive, especially if it produces a dust cloud. Initiating the combustion process inside the dust–air cloud spreads this process throughout the entire volume. In this article, experiment was carried out to study the influence of type of hardwood on combustion parameters. An experimental investigation was carried out to determine the evolution of the ignition sensitivity, fire behaviour and explosion characteristics of three types of hardwood dust. To determine dust behaviour under fire conditions, a cone calorimeter was used. Explosion characteristics were tested with the use of a 20 L spherical vessel and minimum ignition energy tested on MINOR II Apparatus, which is a modified Hartmann’s Tube. Studies have shown a large effect of particle size on explosion parameters, while for flammability parameters the effect is not so noticeable.
29 February 2024 in Science of The Total Environment