Institute of Applied and Physical Chemistry and Centre for Environmental Research and Sustainable Technology University of Bremen Leobener Str. 6 28359 Bremen Germany
Auto-generated profile, based on publicly available information
Jorge Adrian Tapia Burgos
Institute of Applied and Physical Chemistry and Centre for Environmental Research and Sustainable Technology University of Bremen Leobener Str. 6 28359 Bremen Germany
Nanoporous gold as obtained by corrosion of alloys of gold and a less noble metal is a system with manifold applications. The process of dealloying, however, can result in partially porous samples, when dealloying conditions are not optimized with respect to composition and pre-treatment of the master alloy. In the present work, we investigate the dealloying interface between porous material and non-porous alloy in two samples, in which dealloying either stopped automatically or was interrupted manually. Reasons for unintended termination of dealloying in the former case are suggested. GRAPHICAL ABSTRACT
A series of different singlet oxygen photosensitizers was immobilized onto nanoporous gold powder with a mean pore size of 40 nm via copper catalyzed azide–alkyne cycloaddition. The attachment of phthalocyanine and porphyrin derivatives was performed on the peripheral substituent of the macrocycle, whereas the subphthalocyanine derivatives were attached via the axial substituent with respect to the macrocyclic ring system. All obtained hybrid systems were studied in the photooxidation of 2,5-diphenylfuran as a chemical singlet oxygen quencher and showed increased photocatalytic activity compared to the same amount of the corresponding photosensitizer in solution due to photoinduced interactions of the plasmon resonance of the nanostructured gold support and the attached photosensitizer. The understanding of the different photophysical interactions depending on the coordination mode of the macrocycle as well as the position of the absorbance in the electromagnetic spectrum is an important point in the development towards highly active hybrid photocatalysts covering a broad absorption range within the spectrum of visible light.
19 April 2021 in Photochemical & Photobiological Sciences
Nanoporous gold was functionalized with a photosensitizer, a zinc(II) phthalocyanine derivative. Such systems are active for the generation of reactive singlet oxygen which can be used for photocatalytic oxidation reactions. This study aims to demonstrate the versatility of such an approach, in terms of substrates and the employed solvent, only possible for a truly heterogeneous catalytic system. The activity of the hybrid system was studied for [4 + 2] cycloadditions of three different types of dienes and a total of eight substrates in two organic solvents and once in water. The highest activity was measured for 1,3-diphenylisobenzofuran, which is also highest in terms of sensitivity for the reaction with 1O2. Trends in conversion could be anticipated based on reported values for the rate constant for the reaction of 1O2. In almost all cases, an amplification of the conversion by immobilization of the sensitizer onto nanoporous gold was observed. The limiting case was ergosterol, which was the largest of all substrates with a van-der-Waals radius of about 2.1 nm. Additional factors such as the limited lifetime of 1O2 in different solvents as well as the hampered diffusion of the substrates were identified. Graphic abstract
Nanoporous gold powder was functionalized in a two-step approach by an azide terminated alkanethiol self-assembled monolayer (SAM) and a zinc(II) phthalocyanine (ZnPc) derivative by copper catalyzed azide-alkyne cycloaddition (CuAAC). A series of different hybrid systems with systematic variation of the alkyl chain length on both positions, the alkanethiol SAM and the peripheral substituents of the ZnPc derivative, was prepared and studied in the photooxidation of diphenylisobenzofuran (DPBF). An enhancement by nearly one order of magnitude was observed for the photosensitized singlet oxygen (1O2) generation of the hybrid systems compared to the same amount of ZnPc in solution caused by the interaction of the npAu surface plasmon resonance and the excited state of the immobilized sensitizer. This interaction was shown to be distance dependent, with decreasing activity for short SAMs with alkyl chain lengths < 6 methylene groups caused by quenching of the excited state via electron transfer as well as decreasing activity for SAMs with n > 8 methylene groups due to decreasing energy transfer for long distances. An unexpected distance dependent behaviour was observed for the variation of the peripheral alkyl chain on the photosensitizer revealing a planar orientation of the immobilized photosensitizer on the nanoporous gold surface by a penta-coordinated central zinc ion through interaction with free azide groups from the self-assembled monolayer.
Nanoporous gold (npAu) has garnered significant attention as a highly active and selective oxidation catalyst, particularly at low temperatures. While most studies have focused on npAu derived from AuAg alloys, the incorporation of other less noble metals (LNMs), such as Cu, was shown to be a viable opportunity for tuning and enhancing its catalytic properties. The interplay between multiple LNMs present at the same time remains underexplored though. While trimetallic systems like npAu(CuAg) offer the chance for broadening the catalytic scope of npAu even further, a key challenge in utilizing them lies in understanding whether synergistic interactions or a combination of effects exerted by the individual LNMs determine their catalytic performance. To address this, we developed a reliable and reproducible method for synthesizing npAu(CuAg) and compared the trimetallic catalysts to their bimetallic counterparts npAu(Ag) and npAu(Cu) with respect to their catalytic activity for aerobic CO oxidation. Using controlled dealloying, we synthesized npAu(CuAg) with ∼20 nm ligaments, exhibiting an Ag‐rich surface, and a Cu‐enriched bulk. These trimetallic catalysts showed high conversion over a broad temperature regime ranging from room temerature to 250 °C. Electron microscopy and X‐ray photoelectron spectroscopy revealed that during activation under reaction conditions Cu segregates to the surface at elevated temperatures so that finally Ag as well as Cu sites are available enabling the activation of oxygen – on the former at low temperatures and on the latter in the high temperature region >120 °C. In this way, an overall temperature window for catalytic activity is achieved which encompasses the range of npAu(Ag) as well as that of npAu(Cu). At the same time, the thermal stability of the nanoporous network is improved, demonstrating in essence that the ternary alloy outperforms the binary systems by unifying catalytically relevant features of both LNMs.