Feng-Yuan Zhang

Feng-Yuan Zhang

Auto-generated profile, based on publicly available information

Feng-Yuan Zhang

Department of Mechanical, Aerospace & Biomedical Engineering, University of Tennessee, Knoxville, Knoxville, USA

Research Focus & Metrics

Academic Career Length

30Years (1997-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2006 in Journal of the Electrochemical Society
Verified
Journal Article
Closed access
PDF file
FZF. Y. Zhang
F. Y. Zhang
XYX. G. Yang
X. G. Yang
CWC. Y. Wang
C. Y. Wang
Liquid water transport and removal from the gas diffusion layer (GDL) and gas channel of a polymer electrolyte fuel cell (PEFC) are studied experimentally and theoretically. In situ observations of the liquid water distribution on the GDL surface and inside the gas channel were made in an operating transparent PEFC. Liquid droplet formation and emergence from the GDL surface are characterized and two modes of liquid water removal from the GDL surface identified: one through droplet detachment by the shear force of the core gas flow followed by a mist flow in the gas channel, and the other by capillary wicking onto the more hydrophilic channel walls followed by the annular film flow and/or liquid slug flow in the channel. In the former regime, typical of high gas flow rates, the droplet detachment diameter is correlated well with the mean gas velocity in the channel. In the latter regime characteristic of low gas flow rates, liquid spreading over hydrophilic channel surfaces and drainage via corner flow were observed and analyzed. A theory is developed to determine what operating parameters and channel surface contact angles lead to sufficient liquid drainage from the fuel cell via corner flow. Under these conditions, the fuel cell could operate stably under a low flow rate (or stoichiometry) with only a minimum pressure drop required to drive the oxidizer flow. However, when the corner flow is insufficient to remove liquid water from the gas channel, it was observed that the annular film flow occurs, often followed by film instability and channel clogging. Channel clogging shuts down an entire channel and hence reduces the cell’s active area and overall performance.

1 January 2004 in Electrochemical and Solid-State Letters
Verified
Journal Article
Closed access
PDF file
XYX. G. Yang
X. G. Yang
FZF. Y. Zhang
F. Y. Zhang
ALA. L. Lubawy
A. L. Lubawy
CWC. Y. Wang
C. Y. Wang
Using an optical /air polymer electrolyte fuel cell (PEFC), the mechanics of liquid water transport, starting from droplet emergence on the gas diffusion layer (GDL) surface, droplet growth and departure, to the two-phase flow in gas channels, is characterized under automotive conditions of 0.82 A/cm2, 70°C, and 2 atm. It is observed that water droplets emerge from the GDL surface under oversaturation of water vapor in the gas phase, appear only at preferential locations, and can grow to a size comparable to the channel dimension under the influence of surface adhesion. Liquid film formation on more hydrophilic channel walls and channel clogging are also revealed and analyzed. © 2004 The Electrochemical Society. All rights reserved.

1 June 2015 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
BHBo Han
Bo Han
SSStuart M. Steen
Stuart M. Steen
JMJingke Mo
Jingke Mo
FZFeng-Yuan Zhang
Feng-Yuan Zhang

4 November 2016 in Science Advances
Verified
Journal Article
Open access
PDF file
JMJingke Mo
Jingke Mo
Zhenye KangZhenye Kang
Zhenye Kang
SRScott T. Retterer
Scott T. Retterer
DCDavid A. Cullen
David A. Cullen
Todd ToopsTodd Toops
Todd Toops
FZFeng-Yuan Zhang
Feng-Yuan Zhang
Increase 50-time catalyst mass activity from revealing true reactions in proton exchange membrane electrolysis.

11 October 2016 in Energy & Environmental Science
Verified
Journal Article
Closed access
PDF file
Zhenye KangZhenye Kang
Zhenye Kang
JMJingke Mo
Jingke Mo
GYGaoqiang Yang
Gaoqiang Yang
SRScott T. Retterer
Scott T. Retterer
DCDavid A. Cullen
David A. Cullen
FZFeng-Yuan Zhang
Feng-Yuan Zhang
Liquid/gas diffusion layers (LGDLs), which are located between the catalyst layer (CL) and bipolar plate (BP), play an important role in enhancing the performance of water splitting in proton exchange membrane electrolyzer cells (PEMECs). They are expected to transport electrons, heat, and reactants/products simultaneously with minimum voltage, current, thermal, interfacial, and fluidic losses. In this study, the thin titanium-based LGDLs with straight-through pores and well-defined pore morphologies are comprehensively investigated for the first time. The novel LGDL with a 400 μm pore size and 0.7 porosity achieved a best-ever performance of 1.66 V at 2 A cm−2 and 80 °C, as compared to the published literature. The thin/well-tunable titanium based LGDLs remarkably reduce ohmic and activation losses, and it was found that porosity has a more significant impact on performance than pore size. In addition, an appropriate equivalent electrical circuit model has been established to quantify the effects of pore morphologies. The rapid electrochemical reaction phenomena at the center of the PEMEC are observed by coupling with high-speed and micro-scale visualization systems. The observed reactions contribute reasonable and pioneering data that elucidate the effects of porosity and pore size on the PEMEC performance. This study can be a new guide for future research and development towards high-efficiency and low-cost hydrogen energy.

1 September 2016 in Applied Energy
Verified
Journal Article
Closed access
JMJingke Mo
Jingke Mo
Zhenye KangZhenye Kang
Zhenye Kang
GYGaoqiang Yang
Gaoqiang Yang
SRScott T. Retterer
Scott T. Retterer
DCDavid A. Cullen
David A. Cullen
FZFeng-Yuan Zhang
Feng-Yuan Zhang