This article presents a 12-bit 1.5-GS/s single-channel pipelined successive approximation register (SAR) analog-to-digital converter (ADC). The ADC leverages a pipelined residue amplification (RA) stage scheme, early quantization technique, and fast differential ring amplifier (ringamp) to achieve high speed and high power efficiency simultaneously. The pipelined RA stage scheme allows the RA and SAR conversion to run in parallel for a fast pipelining operation and a relaxed residue amplifier’s bandwidth requirement, thus alleviating the speed bottleneck of the pipelined SAR ADCs. The early quantization technique reduces the timing budget of the SAR conversion phase, thereby further improving the ADC speed. The differential ringamp with a short settling time and low common-mode gain guarantees the high accuracy and high speed of the critical RA. Furthermore, a flexible digital-to-analog-converter (DAC) topology combining the scaling capacitor and bridge capacitor is employed to align the quantization range avoiding large overheads. The prototype ADC was fabricated in a 28-nm CMOS process and consumes 21.3 mW at 1.5 GS/s. The signal-to-noise-and-distortion-ratio (SNDR) and spurious-free dynamic range (SFDR) are 58.5 and 74.5 dB with a Nyquist input, respectively, achieving a Walden figure-of-merit (FoM) of 20.7 fJ/conversion step and a Schreier FoM of 164 dB.
26 January 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper introduces a dual main clock generator (DMCG) and a digital serializer (DS) to improve the power efficiency of the time-interleaving (TI) analog-to-digital converters (ADCs). The proposed DMCG combines a dual-path front end and an improved selecting signal generator that addresses the potential phase error and reduces the peak current of the clock-driving circuits by 60%. The DS is proposed to serialize the digital outputs without employing power-hungry inverter-based buffer chains thus reducing the power consumption by 39.2%. The reference-free time skew extraction algorithm (RFA) is presented to mitigate the accuracy deterioration due to selecting the fixed middle channel. These techniques are validated by a prototype 12-bit 10-GS/s TI pipelined successive approximation register (TI-Pi-SAR) ADC. Fabricated in a 28-nm CMOS process, the prototype chip occupies an area of 4.4 mm $^{2}$ . The measurement results show that the ADC achieves a 49.8 dB SNDR and 60.0 dB SFDR after calibration at Nyquist frequency, while the total power consumption is 270 mW, leading to the figure of merits of Schreier (FoM $_{\mathrm{S}})$ and Walden (FoM $_{\mathrm{W}})$ of 152.5 dB and 106.9 fJ/conv.-step, respectively.
17 March 2025 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
A digital background calibration technique is proposed in this brief, utilizing comparator metastability to correct conversion errors from interstage gain errors and higher order nonlinearities for the first time. The method calibrates nonlinear conversion errors by injecting multilevel dithers and observing amplifier gain variations. It offers advantages, such as simple design, high accuracy, fast convergence, and low power consumption. Simulation results demonstrate the effectiveness of the technique, with the signal to noise and distortion ratio (SNDR) and spurious free dynamic range (SFDR) performances of a 14-bit two-stage pipelined successive approximation register analog-to-digital converter (SAR ADC) improving from 60.4 and 73.6 to 84.5 and 110.0 dB, respectively. The convergence speed of the calibration algorithm is 0.8 million samples.
This paper presents a digital background calibration technique that uses a split-least-significant-bit (Split-LSB) weight to simultaneously address both capacitor mismatch and gain nonlinearity in pipelined successive approximation register analog-to-digital converters (SAR ADCs). The key innovation of this approach lies in the use of sub-LSB weights, derived from splitting the LSB capacitor, to detect and correct nonlinearity. By integrating 1-bit dynamic element matching (DEM) with a separate-averaging algorithm, this technique achieves the first offset-immune background calibration capable of calibrating both error sources simultaneously. Behavioral simulations of a 14-bit pipelined SAR ADC show significant performance improvements: the signal-to-noise-and-distortion ratio (SNDR) increases from 52.4 dB to 84.2 dB, and the spurious-free dynamic range (SFDR) rises from 56.3 dB to 104.5 dB. These results validate the effectiveness of the proposed technique.