Partial multiple-input multiple-output (MIMO) -based weakly-coupled mode-division multiplexing (MDM) transmission has been proposed to reduce the MIMO matrix size in MDM. This technique can mitigate the burden of MIMO processing for high-order few-mode fiber (FMF) transmission. In this paper, firstly, we show that modal XT can be sufficiently suppressed over the C+L band using a weakly-coupled FMF and a highly mode-selective multiplexer/de-multiplexer. Next, 10-mode-multiplexed 336-WDM transmission of dual-carrier 12-Gbaud dual-polarization (DP) - quadrature phase-shift keying (QPSK) signals over a 48-km weakly-coupled FMF using only 2x2 or 4x4 partial MIMOs is demonstrated. To the best of our knowledge, in this experiment, we achieve a record fiber capacity of 257 Tbps with an aggregate spectral efficiency of 30.5 bit/s/Hz in single-core fiber transmission.
30 January 2018 in Journal of Lightwave Technology
Space-division multiplexing (SDM) is an attractive technique for dramatically enhancing the transmission capacity in a single optical fiber. Recently, ultra-dense SDM transmission experiments with a spatial multiplicity of over 100 have been reported by using few-mode multi-core fibers (FM-MCFs). Considering the maximum capacity of around 100 Tbit/s reported in single-mode single-core fiber transmission experiments, the capacity in FM-MCF transmission with more than 100 spatial channels is expected to reach 10 peta-bit/s; however, the maximum capacity has been limited to 2 peta-bit/s. In this paper, we demonstrate ultra-dense SDM transmission of 739 WDM 12-Gbaud dual polarization (DP) – 64-quadrature amplitude modulation (QAM) / 16-QAM signals over 11.3-km 6-mode 19-core fiber using the C+L band, achieving a record fiber capacity of 10.16 peta-bit/s with an aggregate spectral efficiency of 1099.9 bit/s/Hz.
Mode-division multiplexing (MDM) using few-mode fibers (FMFs) appears as a promising technology to increase fiber capacity by a few orders of magnitude and sustain the traffic demand for the decades to come. The potential of MDM lies in its ability to exploit multiple modes within a single optical fiber strand. Since 2011 and the first promising demonstrations, impressive progress has been made. In this article, we will show how the most recent advances in design and fabrication have improved the performance of FMFs and MDM systems, and allowed to turn research demonstrations into practical deployments.
The mode-division-multiplexing (MDM) transmission technique using a few-mode fiber (FMF) has been investigated to overcome the theoretical limitation of the transmission capacity of a single-mode fiber. In MDM transmission, multiple-input multiple-output (MIMO) digital signal processing (DSP) is generally required on the receiver side to compensate for the modal crosstalk (XT) between the spatial modes. However, the computational cost is high, especially for high-order MDM systems that use many spatial modes. To reduce the MIMO matrix size, MDM transmission with partial MIMO-based DSP has been proposed using weakly coupled FMFs. The modal XT in such fibers can be suppressed by a special fiber design; however, the modal XT still remains and strongly limits the signal-to-noise-ratio (SNR) and capacity. To further increase the capacity for a given SNR, an optimization of the modulation format is significant. Recently, probabilistic shaping (PS) has received attention since it can gradually change the entropy of a modulation format and maximize the capacity for a given SNR. In this work, we demonstrate weakly coupled 10-mode-multiplexed transmission with four 4×4 MIMOs and two 2×2 MIMOs using rate-adaptive PS-16QAM signals over 48-km FMF, achieving a record transmission capacity of 402.7 Tb/s in 125-μm cladding single-core fiber transmission experiments. Furthermore, we also show the possibility of a further capacity increase by adjusting the entropies of the PS-16QAM signals depending on the spatial mode.
3 September 2021 in Journal of Lightwave Technology
Since optical submarine cable systems are a part of the global communications infrastructure, their total capacity must be continuously and dramatically enlarged. Recently, methods how to maximize the transmission capacity under electrical power limitations have been studied, and it has been reported that a single band (C-band only) transmission system with more fiber pairs (FPs) could be a promising technology. This finding has triggered work on submarine cables with more FPs. For a further increase in FPs in optical submarine cable systems, which also have space limitations in existing cable designs, space-division multiplexing (SDM) technologies such as multi-core fibers (MCFs) and multi-mode fibers (MMFs) could be promising solutions. In particular, 125-μm standard cladding SDM fibers are attractive for early deployment in submarine cable systems since they are expected to have high productivity and high mechanical reliability similar to existing single-mode fibers (SMFs) with the same cladding diameter. In this paper, we report transpacific MCF transmission over a 30-nm bandwidth using standard cladding ultralow-loss coupled 4-core fibers, extending our previous work. The Q 2 -factors of 608 (4 core × 152 WDM) SDM/WDM channels modulated with 24-Gbaud DP (dual polarization)-QPSK (quadrature phase shift keying) exceeded the assumed forward error correction (FEC) limits after a 9,150-km transmission. As a result, transmission capacity of 50.47 Tbit/s and a capacity-distance product of 461.8 Pbit/s·km were achieved for standard cladding diameter SDM fibers.
18 October 2018 in Journal of Lightwave Technology
We demonstrate a 6-mode and 580-wavelength multiplexed transmission with an inline C+L-band 6-mode erbium-doped fiber amplifier (6M-EDFA). This is the first demonstration of amplified transmission with a C+L-band few-mode EDFA. The 6M-EDFA is designed with an extremely wide erbium-doping profile to cover all spatial modes with population inversion uniformly, thus, suppressing differential modal gain within 5.6 dB in both C-band (1535-1563 nm) and L-band (1574-1602 nm) for the total input signal power of +3 dBm. As a transmission line, we use an 11.3-km 6-mode 19-core fiber and connect eight cores of the fiber to emulate transmission fiber spans. Although the transmission line includes additional losses of fan-in/fan-out devices for the connection between cores, transmission over 90.4 km is successfully demonstrated. The total capacity and spectral efficiency reach 266.1 Tb/s and 36.7 bit/s/Hz, respectively.