Mode-division multiplexing (MDM) using few-mode fibers (FMFs) appears as a promising technology to increase fiber capacity by a few orders of magnitude and sustain the traffic demand for the decades to come. The potential of MDM lies in its ability to exploit multiple modes within a single optical fiber strand. Since 2011 and the first promising demonstrations, impressive progress has been made. In this article, we will show how the most recent advances in design and fabrication have improved the performance of FMFs and MDM systems, and allowed to turn research demonstrations into practical deployments.
4 December 2017 in Journal of Lightwave Technology
5Tb/s bidirectional transmission (2.5Tb/s in each direction) over 2.2km of OM2 fiber is demonstrated using selective excitation of 4 mode groups, wavelength division multiplexing and direct detection. 20 wavelengths per mode group are used, each wavelength is modulated using discrete multitone scheme with 1024 subcarriers with external Lithium Niobate Mach-Zehnder modulator (MZM). A minimum bit rate of 68.8Gb/s per channel is obtained for a bit error rate (BER) of 3.8x10-2 using a 65Gs/s digital to analog converter (DAC). Same bit rate is achieved over 4.4km using 88Gs/s DAC. Electro-absorption modulated laser (EML) with a 3-dB bandwidth of 18GHz is also used in the same mode group division transmission. 1dB power penalty is measured with the EML compare to MZM. A minimum of channel bit rate of 68.5Gb/s over 2.2km of OM2 fiber with the EML and 88Gs/s DAC is reported. Therefore, we demonstrate the transmission of the same throughput over multimode fiber using a low cost EML instead of an external MZM.
19 September 2023 in Journal of Lightwave Technology
In recent years, space-division multiplexing (SDM) has been proposed and investigated as a technique to increase the per-fiber capacity in order to cope with the ever-increasing demand for capacity in optical transmission networks. Considering the various SDM architectures proposed, multi-mode fibers potentially allow for the highest spatial channel density, but current demonstrations have been limited to mostly short-distance high-mode count or long-distance low-mode count transmission. In this work, we transmit 15 modes × 184 wavelength channels × 24.5 GBd PDM-16-QAM signals, spanning the full C-band, over 1001 km of 15-mode multi-mode fiber. The resulting net data rate of 273.6 Tb/s is the highest reported data rate in long-distance multi-mode fiber transmission and results in a record capacity-distance product of 273.9 Pb/s · km for multi-mode transmission. This was achieved by using mode multiplexers with low mode-dependent loss (MDL) and insertion loss, as well as a 15-mode fiber optimized for a low differential mode delay (DMD) transmission regime.
11 December 2020 in Journal of Lightwave Technology
The capacity of space division multiplexing (SDM) systems with coupled channels is fundamentally limited by mode-dependent loss (MDL) and mode-dependent gain (MDG) generated in components and amplifiers. In these systems, MDL/MDG must be accurately estimated for performance analysis and troubleshooting. Most recent demonstrations of SDM with coupled channels perform MDL/MDG estimation by digital signal processing (DSP) techniques based on the coefficients of multiple-input multiple-output (MIMO) adaptive equalizers. Although these methods provide a valid indication of the order of magnitude of the accumulated MDL/MDG over the link, MIMO equalizers are usually updated according to the minimum mean square error (MMSE) criterion, which is known to depend on the channel signal-to-noise ratio (SNR). Therefore, MDL/MDG estimation techniques based on the adaptive filter coefficients are also impaired by noise. In this paper, we model analytically the influence of the SNR on DSP-based MDL/MDG estimation, and show that the technique is prone to errors. Based on the transfer function of MIMO MMSE equalizers, and assuming a known SNR, we calculate a correction factor that improves the estimation process in moderate levels of MDL/MDG and SNR. The correction factor is validated by simulation of a 6-mode long-haul transmission link, and experimentally using a 3-mode transmission link. The results confirm the limitations of the standard estimation method in scenarios of high additive noise and MDL/MDG, and indicate the correction factor as a possible solution in practical SDM scenarios.
We demonstrate digital turbulence compensation using a 12-spatial mode digital coherent receiver with a multimode preamplifier that provides a 6-dB sensitivity improvement. This combination acts similarly to ideal lossless adaptive optics. Coherent superposition of 12 spatial-modes reduced median BER from 0.1 to 1×10-5 compared to traditional single-mode detection.
Transmission based on mode-division multiplexing can enhance node flexibility in metropolitan networks by exploiting mode-group routing. In fact, each mode group, constituted by degenerate spatial modes, can act as a single modal super-channel: since the inter-group crosstalk remains limited or even negligible among different mode groups for sufficiently short distances, typical of urban scenarios, the mode groups can be optically multiplexed and demultiplexed at the network nodes. Moreover, each group can cover an optical path independent from the propagation of the other groups, and be received by means of a so-called partial-MIMO processing, handling just its own degenerate modes, with a significant reduction of the necessary digital resources. In this paper we experimentally assess the capabilities of such a mode-group approach using a few-mode fiber, supporting 5 mode groups, already deployed in the city of L'Aquila, Italy. Transmission throughput versus DSP resources (in terms of number of taps required to achieved a proper GMI) is analyzed, experimenting different modulation formats (at 50 Gbaud), in case of 75-GHz spaced WDM transmission. The large number of spatial modes supported by the few-mode fiber employed in the field-trial allows to explore several combinations of transmitted mode groups in order to better understand how the inter-group cross-talk affects the capacity performance. Almost 2-Tb/s capacity per WDM channel is demonstrated for 6 WDM channels over 6.1-km few-mode fiber reach, thanks to partial MIMO. Finally, multi-hop routing is also performed in a 4-node scenario, in particular taking into account the impact of the optical mode multiplexer/demultiplexer employed in the field trial on the routed throughput per wavelength.