We present measurements of [equation], [equation] and K[equation] spectra in [equation] C production interactions at 158 [equation] and [equation] spectra at 350 [equation]using the NA61/SHINE...
We investigate the approach to scale up the productivity of the laser-based generation of superhydrophobic surfaces by means of increased average laser powers to enhance the surface structuring rates. Polished surfaces (mean roughness depth SRz = 0.076 μm) of stainless steel AISI 316L were processed with a laser delivering 8 ps long pulses with a constant pulse energy of 1.4 mJ at pulse repetition rates of 100 kHz or 300 kHz corresponding to average laser powers of 140 W or 420 W, respectively. When the feed rate for the corresponding pulse repetition rate is adjusted in a way to result in a similar temperature increase due to heat accumulation effects and the re-deposition of nanoparticles formed during processing is avoided, comparable surface structures with similar wetting behavior are obtained.
Heat accumulation due to successive laser pulse (HAP) incident on the same spot and heat accumulation due to successive scans (HAS) of the laser beam over the same spot significantly influences the process result, especially when the resulting temperature of the workpiece exceeds the melting temperature. In particular, heat accumulation is one of the dominating effects during short-pulse laser functionalization of surfaces and strongly affects the resulting surface structures. Within this study, a novel heat accumulation model is introduced to calculate the temperature increase in the workpiece for the whole process including the effects of HAP and HAS in which the latter is differentiated between heat accumulation due to multiple passes (HAS-I) and heat accumulation due to multiple layers (HAS-II). With the new model, the surface structure was successfully predicted when using an ultra-short pulsed (USP) laser with an average power of 420 W for laser surface structuring of polished AISI 316L.