30 May 2016 in Applied Physics Letters
We demonstrate a comprehensive modification study of silica glass, crystalline silicon, and amorphous silicon film, irradiated by tightly focused cylindrical vector beams with azimuthal and radial polarizations. The evidence of the longitudinal field associated with radial polarization is revealed by second harmonic generation in z-cut lithium niobate crystal. Despite the lower threshold of ring-shaped modification of silicon materials, the modification in the center of single pulse radially polarized beam is not observed. The phenomenon is interpreted in terms of the enhanced reflection of longitudinal component at the interface with high-index contrast, demonstrating that the longitudinal component is inefficient for the flat surface modification. Enhanced interaction of the longitudinal light field with silicon nanopillar structures produced by the first pulse of double-pulse irradiation is also demonstrated.
26 May 2017 in APL Photonics
High-precision three-dimensional ultrafast laser direct nanostructuring of silica glass resulting in multi-layered space-variant dielectric metasurfaces embedded in volume is demonstrated. Continuous phase profiles of nearly any optical component are achieved solely by the means of geometric phase. Complex designs of half-wave retarders with 90% transmission at 532 nm and >95% transmission at >1 μm, including polarization gratings with efficiency nearing 90% and computer generated holograms with a phase gradient of ∼0.8π rad/μm, were fabricated. A vortex half-wave retarder generating a single beam optical vortex with a tunable orbital angular momentum of up to ±100ℏ is shown. The high damage threshold of silica elements enables the simultaneous optical manipulation of a large number of micro-objects using high-power laser beams. Thus, the continuous control of torque without altering the intensity distribution was implemented in optical trapping demonstration with a total of 5 W average power, which is otherwise impossible with alternate beam shaping devices. In principle, the direct-write technique can be extended to any transparent material that supports laser assisted nanostructuring and can be effectively exploited for the integration of printed optics into multi-functional optoelectronic systems.
15 February 2016 in Applied Physics Letters
Self-assembled nanostructures created by femtosecond laser irradiation are demonstrated in alkali-free aluminoborosilicate glass. The growth of the induced retardance associated with the nanograting formation is three orders of magnitude slower than in silica glass and is observed only within a narrow range of pulse energies. However, the strength of retardance asymptotically approaches the value typically measured in pure silica glass, which is attractive for practical applications. A similar intensity threshold for nanograting formation of about 1 TW/cm2 is observed for all glasses studied. The radially polarized vortex beam micro-converter designed as a space-variant quarter-wave retarder for the near-infrared spectral range is imprinted in commercial Schott AF32 glass.
20 August 2018 in Applied Physics Letters
Femtosecond laser nanostructured indium tin oxide (ITO) coated glass is shown to act both as a liquid crystal (LC) alignment layer and as an electrode with higher transparency. The nanopatterns of the 120 nm period were created using ultrashort laser pulses directly on ITO films without any additional spin coating materials or lithography process. Nine regions of laser-induced nanostructures were fabricated with different alignment orientations and various pulse energy levels on top of the ITO confirming the follow-up of the LC director to the line orientation. The device interfacial anchoring energy was found to be , comparable to the anchoring energy of nematic LC on photosensitive polymers. The transparency as an electrode was found to improve due to the better antireflection and lower absorption expected from a nanostructured surface.
8 February 2025 in ACM Transactions on Storage
Sustainable and cost-effective long-term storage remains an unsolved problem. The most widely used storage technologies today are magnetic (hard disk drives and tape). They use media that degrades over time and has a limited lifetime, which leads to inefficient, wasteful, and costly solutions for long-lived data. This article presents Silica: the first cloud storage system for archival data underpinned by quartz glass, an extremely resilient media that allows data to be left in situ indefinitely. The hardware and software of Silica have been co-designed and co-optimized from the media up to the service level with sustainability as a primary objective. The design follows a cloud-first, data-driven methodology underpinned by principles derived from analyzing the archival workload of a large public cloud service. Silica can support a wide range of archival storage workloads and ushers in a new era of sustainable, cost-effective storage.