20 June 2024 in Journal of Lightwave Technology
The phase signals, combined with time-domain signal processing methods, are often used for recognition with the phase-sensitive optical time-domain reflectometer (Φ-OTDR). Considering the advanced and sophisticated algorithms prevalent in the field of image processing, a vibration signal imaging method is proposed to enhance the adaptability of phase signals for learning by image network. The phase time series is converted to a Markov Transition Fields (MTF) matrix, from which the based matrix is extracted by Non-negative Matrix Factorization (NMF) and saved as an RGB image. One-dimensional (1-D) Convolutional Neural Network (CNN) and 2-D CNN are applied in the experiment to classify the phase signals and images, respectively. The experimental results show that the training convergence efficiency of 2-D CNN using NMF-MTF images is significantly higher than that of 1-D CNN, demonstrating the effectiveness of converting phase signals into images. In addition, the average recognition accuracy for the four fence events is improved by more than 13% by introducing the NMF algorithm on the MTF matrix.
6 March 2023 in IEEE Photonics Technology Letters
A novel fiber optic Fabry-Perot acoustic sensor based on a grooved diaphragm has been proposed, avoiding the decrease of resonant frequency due to the enhanced sensitivity of the sensor based on conventional circular diaphragm. The effect of the structural parameters on sensitivity and resonant frequency is investigated by finite element simulation, and the designed diaphragm is fabricated by a digital light processing 3D printer. Experimental results indicate that the sensor based on the grooved diaphragm has an acoustic pressure sensitivity of 37.44 mV/Pa @2 kHz and a resonant frequency of 2.12 kHz, where the sensitivity is about 2.07 times that of the sensor based on the conventional circular diaphragm and the resonant frequency is almost unchanged. It is shown that the proposed sensor has the advantages of simple fabrication process, high consistency, and excellent applicability for weak acoustic signal detection.
28 February 2023 in IEEE Sensors Journal
A novel fluorescent fiber sensor based on cerium (Ce) and terbium (Tb) co-doped silica fiber (CTDSF) for partial discharge (PD) detection is proposed. The luminescence mechanism and the PD detection principle of CTDSF are theoretically investigated. The CTDSF is fabricated using the rod-in-tube (RIT) technique combined with the CO2 laser-heated drawing method. The intense emission peak of Tb $^{{3}+}$ ions located at 542 nm ( $^{{5}}\text{D}_{{4}}$ - $^{{7}}\text{F}_{{5}}$ transition) is excited at 302 nm, which indicates the energy transfer (ET) between Ce $^{{3}+}$ and Tb $^{{3}+}$ ions. Moreover, the excitation peak region near 302 nm is well aligned with the PD light emission spectrum. Subsequently, the PD time-domain signals of the needle-plate defect are experimentally measured by utilizing the CTDSF sensor, high-frequency current transformer (HFCT), and plastic scintillation fiber (PSF). Also, the experimental results demonstrate that the CTDSF sensor can detect PD signals and has an excellent PD detection linear response with a sensitivity of 0.22 ns $\cdot \text{V}$ /pC. Furthermore, the sensitivity of the CTDSF sensor is approximately 2.4 times dramatically higher than that of the PSF sensor. The CTDSF sensor integrated with the all-fiber system is predicted to have a wide range of potential applications for online PD detection.
2 June 2021 in IEEE Sensors Journal
A flexible and detachable gas-absorption cell with variable optical path length was designed to obtain the optical path optimal length for gas detection based on ultraviolet differential optical absorption spectroscopy. A model of the gas-absorption cell structure was established based on Lambert-Beer law. This model demonstrates the effect of different optical path lengths on ammonia detection, and the optical path optimal length of the proposed system is 1.6 m. A gas detection system was developed with the proposed gas-absorption cell, and the feasibility and stability of the system were evaluated at different ammonia concentrations. Owing to the influence of light loss induced by spherical concave mirror reflection and ammonia absorption, the detection results for ammonia at a concentration of 17 ppm are more accurate when the optical path length is 1.6 m versus 0.8 and 2.4 m. The error is less than 0.6% that is consistent with the simulation results. When the optical path length is 1.6 m, the linearity between the detection and the standard values reaches 0.9993. The standard deviation of the detection results is less than 0.3 ppm, indicating good stability of the system. The minimum detection limit of 0.43 ppm per meter is achieved. Water has a slight influence on the results of ammonia concentration detection. When the relative humidity is 7.5%, the response time of the system is 120 s that becomes longer with the increase of relative humidity. This method can be used to detect other gases with high precision.
20 July 2022 in IEEE Photonics Technology Letters
An optical fiber sensor for simultaneous measurement of relative humidity (RH) and temperature is proposed, which is constructed by sandwiching one section of hollow core Bragg fiber (HCBF) between two sections of single mode fiber (SMF). The ultrathin ZnO film is coated on the outer surface of HCBF as humidity-sensitive material. The dips in the transmission spectrum caused by different anti-resonant (AR) modes of HCBF have different sensitivities to the RH and temperature, and then the simultaneous measurement of above two parameters can be realized by solving a cross matrix. For the two dips monitored in the experiments, the sensitivities of the proposed sensor to RH are 0.7 pm/%RH and 16.95 pm/%RH in the range of 46–73 %RH, and the sensitivities to temperature are 25 pm/°C and 26.8 pm/°C in the range of 20-60 °C, respectively. Taking advantage of compact structure, good stability, easy fabrication and the proposed sensor exhibits great potential application in fields of chemical sensors and biochemical detection.
23 September 2024 in IEEE Photonics Technology Letters
Although pulse compression optical time domain reflectometry (PC-OTDR) exhibits high performance in spatial resolution and dynamic range, it inevitably introduces auto-correlation sidelobes, potentially impacting measurement accuracy. In this letter, an improved CLEAN algorithm is proposed to efficiently suppress sidelobes and enhance the peak-to-sidelobe ratio (PSLR) of signals in PC-OTDR. The proposed method introduces an adaptive step factor instead of the traditional fixed factor to reduce the number of iterations. Compared to the traditional method, the proposed method achieves a 2.87 dB improvement of PSLR from a 10 km sensing fiber. In addition, the computation time cost is significantly reduced, which is 1.92 s less than that of the traditional CLEAN algorithm.