18 March 2016 in Superconductor Science and Technology
YBCO or REBCO coated conductor (2G) materials are developed for their superior performance at high magnetic field and temperature. Power system applications based on high temperature superconducting (HTS) 2G wire technology are attracting attention, including large-scale wind power generators. In particular, to solve problems associated with the foundations and mechanical structure of offshore wind turbines, due to the large diameter and heavy weight of the generator, an HTS generator is suggested as one of the key technologies. Many researchers have tried to develop feasible large-scale HTS wind power generator technologies. In this paper, a study on the required performance of a 2G HTS wire for large-scale wind power generators is discussed. A 12 MW class large-scale wind turbine and an HTS generator are designed using 2G HTS wire. The total length of the 2G HTS wire for the 12 MW HTS generator is estimated, and the essential prerequisites of the 2G HTS wire based generator are described. The magnetic field distributions of a pole module are illustrated, and the mechanical stress and strain of the pole module are analysed. Finally, a reasonable price for 2G HTS wire for commercialization of the HTS generator is suggested, reflecting the results of electromagnetic and mechanical analyses of the generator.
15 January 2018 in IEEE Transactions on Applied Superconductivity
The rare isotope science project (RISP) was established at the Institute for Basic Science, Daejeon, South Korea to construct a heavy ion acceleration facility for rare isotope beam production. The separators include two pre- and main separators. The central purpose of the preseparator is to remove the primary and unwanted isotope beams; radiation heating and shielding are the major design considerations. For a warm ion, the high-temperature superconducting (HTS) dipole magnet will be used in the front region of the preseparator, and six HTS quadrupole magnets will be installed consecutively. In this paper, we present the electromagnetic design details and the specifications of the consecutive HTS quadrupole magnets for the preseparator at the RISP. Metal (Stainless steel 316) insulated magnets were designed to include iron cores. Using the finite-element method tool, six HTS magnets were modeled and simulated. The operational characteristics including the field gradient, effective length, and uniformity of each magnet were analyzed and presented as well. The research outcomes will be useful for the actual construction of a heavy ion acceleration facility in South Korea.
1 May 2014 in Journal of Electrical Engineering & Technology
10 October 2014 in Physics Procedia
Tri-axial high-temperature superconducting (HTS) power cables are very efficient compared with other HTS power cables due to their reduced use of HTS wires and cryogenic surface area, resulting from the mutually layered structure of the three phases. However, the operating characteristics of tri-axial HTS power cables differ from other cables in a transient-state condition. In order to install HTS power cables in a real grid, feasibility verification through simulation or experimentation is required in advance. Thus, the authors design a tri-axial HTS power cable and implement a power hardware-in-the-loop simulation that consists of a real time digital simulator-based simulation model and hardware devices including a power supply and a 1 m-long tri-axial HTS model cable. Simulation results show the stability verification under steady-state and transient-state conditions.