11 March 2019 in Plasma Physics and Controlled Fusion
Impurity seeding into a tokamak divertor for radiative cooling is considered as a tool for achieving detached/semi-detached regimes required to meet the condition of acceptable heat loads on divertor plates. Experiments aimed at searching for an operational window with a significant reduction of poloidal heat fluxes due to the impurity radiation and without decrease of confinement are performed on many tokamaks. A critical issue in these experiments is how large a fraction of impurities is retained in the divertor region and how much is extracted upstream to the scrape-off layer. In the present paper a physical mechanism of impurity transport from a divertor towards upstream and back to the divertor is analyzed. It is demonstrated that the widespread concept that the impurity leaks if the parallel thermal force exceeds the friction due to main ions and is retained otherwise—is not correct. In this paper, we contend that the impurity leaks if it crosses the stagnation point of the impurity ion poloidal velocity profile before being ionized, and is retained if it ionizes closer to the target than the location of that stagnation point. Thus the leakage efficiency depends on the relative spatial positions of the impurity atom ionization source and the stagnation point of the impurity ion poloidal velocity profile. The impurity ion poloidal velocity is to large extent the sum of the poloidal projection of its parallel velocity and the E × B drift velocity, where the former is derived from the parallel impurity force balance equation. It is demonstrated that the solution of this equation may be approximated by the balance of friction and thermal forces in all regimes, while other terms are smaller. This allows for expressing the impurity parallel velocity through the main ion one and makes the distribution of the parallel (poloidal) fluxes of the main ions, including Pfirsch–Schlüter fluxes and E × B drift fluxes, to be an important element of the impurity transport. It is shown that the impurity distribution in the edge plasma is rather sensitive to the value of the impurity ion ionization rate. This analysis is supported by simulation results obtained for the ASDEX Upgrade tokamak with various seeding rates of N and Ne with the SOLPS-ITER code. The importance of the inclusion of self-consistent drift flows is demonstrated by comparison to results of corresponding simulations with the drifts turned off.
9 March 2020 in Nuclear Fusion
1 June 2021 in Nuclear Materials and Energy
5 October 2018 in Nuclear Fusion
1 December 2021 in Nuclear Fusion
SOLPS-ITER modelling databases of three tokamaks—ASDEX-Upgrade, JET and ITER with fluid drifts activated are compared to understand the dependence of edge plasma performance on machine size and other global parameters. Two medium Z extrinsic radiating impurity species (Ne and N) are considered. It is demonstrated that N is better kept in the divertor region than Ne in semi-detached and detached divertor conditions due to smaller first ionization potential (FIP effect). Together with the fact that Ne radiates more efficiently at higher plasma temperatures, this leads to an increase in the efficiency of Ne for divertor heat load control with increasing machine size. In larger machines such as JET and ITER Ne can be as efficient a radiator as N while for ASDEX-Upgrade Ne easily leads to radiation from the pedestal and loss of H-mode stability. The relative roles of various physical effects are compared for the three tokamaks based on both whole databases and in more details for chosen semi-detached regimes with comparable fraction of radiated power. It is shown that for smaller machines drift effects are more significant and divertor asymmetries more pronounced.
1 June 2021 in Physics of Plasmas
New analytical expressions for parallel transport coefficients in multicomponent collisional plasmas are presented in this paper. They are improved versions of the expressions written in Zhdanov [Transport Processes in Multicomponent Plasma, English ed. (Taylor and Francis, London, New York, 2002)], based on Grad's 21N-moment method. Both explicit and approximate approaches for the calculation of transport coefficients are considered. Accurate application of this closure for the Braginskii transport equations is discussed. Viscosity dependence on the heat flux is taken into account. Improved expressions are implemented into the SOLPS-ITER code and tested for deuterium and neon ITER cases. Some typos found in Zhdanov [Transport Processes in Multicomponent Plasma, English ed. (Taylor and Francis, London, New York, 2002)] are corrected.