The results of an experimental study conducted on specimens similar to ASTM G109 made with different types of cement and steel, and varying water/cement (w/c) ratios are reported in this paper. A portion of the top surface of the specimens was subjected to an exposure to 3% sodium chloride solution followed by an exposure to air, in cycles, for a large number of repetitions. Half-cell potential measurements were carried out periodically at the beginning of every exposure to chloride solution and also just prior to exposure to air, until a sudden drop in the potential was noticed. The average half-cell potential value of top steel bar, after sudden drop, is observed to be nearly the same, irrespective of steel, cement, and w/c ratio. However, corresponding free and total chloride concentrations, just after the preceding sudden drop, varied with experimental factors. The aforementioned sudden drop is also accompanied by reversal in the direction of current between top and bottom steel bars, indicated by a s...
A method is presented for obtaining condition index of corrosion distressed RC buildings. Method is developed using concepts of fuzzy logic and it integrates visual inspection with in situ investigations for carbonation and chloride content. Distress manifestations and repair priorities are classified. Condition is related to repair priorities through condition ratings. Repair priorities are fuzzy in nature as they are dependent on interpretation of the inspector. Questionnaire survey is prepared and responses are collected from the experts. Obtained data are used for development of fuzzy membership functions for defined repair priorities. A building can be subdivided into various elements. Observations for various distress manifestations are recorded for each element, using the format proposed. These observations are combined using fuzzy extension technique to obtain individual membership function for each element. Defuzzyfication using center of sum method provides with the combined building condition i...
1 November 2020 in Construction and Building Materials
The relationship between the electrical properties and the degree of moisture saturation (DoS) in cement-based materials is a topic of interest with regard to material durability. In this article, an impedance-based approach is presented to characterize the electrical properties as a function of DoS using simplified instrumentation and a new measurement technique. The variation of the real and imaginary parts of the impedance is investigated for saturated and partially saturated conditions at electromagnetic radio frequencies (RF) between 100–500 kHz. Mortar prism samples with water to cement ratios (w/c) of 0.60 and 0.70 are used. A circuit model is proposed to explain the behavior and to calculate the bulk conductivity and permittivity for various saturation degrees. The bulk conductivity of the material is found to follow a systematic pattern for various DoS and at different excitation frequencies, which facilitates the establishment of an empirical quantitative relationship between conductivity and the DoS. Moreover, the enhancement of bulk permittivity at low RF is noticed, and its variation for various DoS is investigated.