19 February 2025 in IEEE Transactions on Dielectrics and Electrical Insulation
The external insulation of the equipment in the valve hall of UHV DC converter station must be able to withstand AC-DC combined voltage influences. Investigating the surface discharge characteristics of external insulation under AC-DC combined voltage is currently a significant research topic. The investigation into the surface streamer characteristics under AC-DC combined voltage is instrumental in elucidating the mechanism of surface flashover. The streamer characteristics of different phases in a single cycle under AC-DC combined voltage were determined by conducting surface streamer discharge tests. The relationship between surface streamer characteristics and different phases under AC-DC combined voltage was summarized. By comparing the test results of surface streamer discharge under DC voltage, this study analyzed the effect mechanism of AC-DC combined voltage on surface streamer characteristics. The directional motion of space charge under AC-DC combined voltage was identified as the primary determinant of surface streamer characteristics.
29 April 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
Surface discharge was a common accident in power systems, significantly impacting the safe and stable operation of the power grid. The insulation structure of power equipment was intricate, and surface discharge characteristics were influenced not only by the insulation material but also by electrode geometry. In the paper, characteristics of streamer discharge along the insulation surface with embedded electrode were investigated under negative DC voltage. The streamer propagation field, velocity, and luminous intensity, were measured by photomultiplier tubes and ICCD camera. Unexpectedly, the disparity in the characteristics of streamer discharge along the insulation surface, with and without an embedded electrode, was substantial. Furthermore, the investigation also revealed that the length of the embedded electrode has a significant influence on the characteristics of surface streamer discharge. Through analysis, it had been determined that the presence of the embedded electrode did not significantly impact the electric field along the insulation surface. However, it had an influence on the charge distribution on the insulation surface, consequently affecting the characteristics of surface steamer discharge. The findings from this research would provide valuable technical support for enhancing external insulation design and operation strategies in DC bushings and other related equipment.
24 October 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
SF 6 is widely used in GIS equipment due to its good insulation properties and high chemical reliability. As a common form of gas discharge, streamer discharge can cause severe damage to the insulation performance. Therefore, the study of the discharge characteristics of streamers in SF 6 gas has practical solid engineering value. There are significant differences in the streamer propagation process in SF 6 gas with different pressures. Aiming at the influence of pressure on the characteristics of streamer discharge, this paper establishes a simulation model of streamer discharge for SF 6 gas based on numerical computation. It systematically studies the characteristics of streamer discharge in SF 6 gas with different pressures. The results show that high-pressure SF 6 gas is less likely to propagate the streamer because of the weaker ionization of particles in high-pressure SF 6 , leading to a reduction in the number of charged particles at the streamer head as well as a reduction in the strength of the electric field at the streamer head. In addition, the equations for the streamer steady propagation electric field and the diameter of the streamer channel as a function of pressure were fitted, respectively.
30 August 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
The surface discharge along the valve side bushing could directly result in single-pole or even bipolar shutdown of the UHVDC project, leading to a significant power grid operation accident. The AC-DC combined voltage and intense vertical component electric field exert a significant influence on the design of the external insulation of the valve side bushing. The paper presented measurements of the stable propagation fields, velocities, and luminous intensity of the streamer discharge in a three-electrode device subjected to combined AC-DC voltage and an intense vertical component electric field directed away from the insulation surface. The propagation of the streamer discharge was inhibited by the intense vertical component electric field directed away from the insulation surface, increased stable propagation field and reduced propagation velocity. The length of the embedded electrode specifically influenced the magnitude of the vertical component electric field along the dielectric surface, thereby significantly impacting the progression of streamer discharge. The influence mechanism of the electric field distribution and ionization effect was investigated to explore the characteristics of streamer discharge under intense vertical component electric fields directed away from the insulation surface. The sliding flashover discharge mechanism along the valve side bushing belonging to the UHVDC converter transformer was elucidated and explicated from the streamer discharge perspective.
17 October 2023 in IEEE Transactions on Dielectrics and Electrical Insulation
Many UHVDC key equipment has to withstand the role of AC and DC composite voltage in operation, so the flashover discharge problem under the action of AC and DC composite voltage is a difficult and key problem in UHVDC insulation design and operation. The streamer discharge is the most important stage before flashover discharge, so it is of great significance to study the characteristics of the streamer discharge under AC and DC composite voltage. In this paper, the key characteristic parameters of positive streamer discharge, such as stable propagation field, propagation velocity and luminous intensity, were measured in the three-electrode structure under the action of AC and DC composite voltage. It was found that the characteristics of streamer discharge under the action of AC and DC composite voltage changed with the phase, which were very different from the characteristics of the streamer discharge under the action of DC voltage. Through numerical simulation calculation method, the influence of space charge on the streamer discharge process under the action of AC and DC composite voltage was explored, and the role of AC and DC composite voltage was reasonably explained.
21 May 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
The valve side bushing of the converter transformer must withstand the influence of AC-DC combined voltage and intense vertical component electric field during operation, of which the design is a challenging and significant problem in the design of UHV external insulation. The investigation of surface discharge on insulated structures subjected to AC-DC composite voltage and intense vertical component electric field is significant for the design of major equipment in UHV DC engineering. In this paper, characteristics of positive streamer discharge under influence of AC-DC combined voltage and intense vertical component electric field was studied deeply. The stable propagation field of the positive streamer discharge was observed to be lower under an intense vertical component electric field compared to that in its absence. The streamer propagation velocity in the 'surface' component was higher under intense vertical component electric field compared to that without, while the propagation velocity in the 'air' component was lower. It was concluded that the intense vertical component electric field enhanced the secondary electron emission and the photoinduced secondary electron emission from the dielectric material, thereby facilitating the progression of surface streamer discharge. The research findings were instrumental in elucidating the mechanism underlying sliding flashover discharge along dielectric materials under the intense vertical component electric field.