The most common method for the electrical steel sheet characterization uses the Epstein frame. However, in the case of high-temperature characterization, the standard Epstein frame is not adapted. This paper deals with the design of a frame adapted to high temperature, up to 600 °C. In a first step, the results at ambient temperature obtained between the normalized Epstein frame and the high-temperature device for different frequencies are compared in order to validate the new frame. The second step is dedicated to the characterization of soft ferromagnetic materials in high temperature, up to 600 °C and for different frequencies. Moreover, the effect of sheet thickness on their behavior has been studied at high temperatures. The obtained measurement results confirm the strong influence of both temperature and thickness on power losses.
13 August 2018 in IEEE Transactions on Energy Conversion
This paper presents a novel method to determine the electromagnetic torque of grid-powered induction machines (IM). The torque determination constitutes a key point for the energy diagnosis and for choosing the well adapted motor in industrial processes. The proposed method is non-invasive as it is based on the measurement of the current and the magnetic external flux around induction machines. The torque estimation protocol is explained and experimental validations are made with an 11 kW IM. The impact of supply voltage variations on the accuracy of the proposed method is also analyzed.
This article proposes a methodology for modeling magnetic anisotropy in ferromagnetic materials. This approach was initially used to represent the isothermal remanent magnetization (IRM) acquired by natural mineral assemblages and based on the use of the cumulative distribution function (CDF) of a probability density function (PDF). For the purpose of this work, the anisotropy of electrical steel sheets is modeled by means of CDFs of Gaussians. The methodology is validated by comparisons between numerical and experimental data obtained from an Epstein frame and a Rotational Single Sheet Tester. The outcomes of the study are twofold: first, the parameters defining the CDF follow a polynomial trendline, and second, they can easily be calculated from a limited amount of experimental data which is a key point from an engineering point of view.
30 April 2018 in IEEE Transactions on Industry Applications
This paper presents a system that enables the passive reduction of noise and vibrations in a three-phase induction machine with a stator damper winding connected to capacitors. This is a simple and effective system for reducing the flux density harmonics in an electrical machine. The theoretical study is based on the modeling of a machine equipped with the damper winding obtained from Kron's theory about equivalent circuits of electrical machinery. The analysis of the equivalent circuit allows one to identify possibilities to reduce the flux density harmonics responsible of unwanted noise and vibration components. Finally, an experimental validation is performed.
The requirement for electrical machines operating at extremely high temperatures has prompted researchers to focus on new materials. The use of nickel-coated copper (Cu/Ni) wires can be a promising alternative to copper wires because of their resistance to oxidation at high temperatures. In this paper, the characterization of Cu/Ni wires’ electrical resistance in the frequency domain as well as the measurement of pure nickel’s B(H) curve have been specified. The effect of nickel-coated on a copper wire is remarkable in terms of electrical resistance at high frequencies because of the skin effect and eddy currents. An original model has been proposed for the prediction of the electrical resistance. The originality is to consider the bimetallic conductor as a transformer in order to generate its model. Since the analytical calculation is not possible because of the non-linearity of nickel’s magnetic properties, a new numerical computational method for the determination of the impedances was proposed. The modeling results are correlated with the experimental tests made on 3 Cu/Ni wires: 0.3mm diameter with 27% of nickel in volume and 0.5mm diameter with 8 μm and 18 μm nickel thickness. The study thus provides essential information about the important parameters for the performance of electrical machines.
6 June 2023 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
The horizontal rotational single-sheet tester (RSST) suffers from weaknesses such as the reduced size of test samples, measurement disturbances due to magnetic flux leakage and nonhomogeneity of field in the measurement area. Although the vertical RSST allows to overcome the first two aforementioned drawbacks, the heterogeneity of the field in the test sample remains an issue. In addition, there is still a lack of device standardization to ensure test repeatability, as already is well established with the Epstein frame. This paper aims to investigate the influence of several parameters on the field homogeneity in the test sample. A fully 3D finite element model of a vertical RSST is developed and used to perform a sensibility study on several geometrical parameters. The influence of several parameters on the field homogeneity in the test sample, such as the geometrical dimensions of the yokes, the presence or not of holes drilled inside the test sample for B-coil placement as well as the size of the H-coils and B-coils, is addressed. It is expected that this study will contribute to the optimization and standardization vertical RSSTs.