The numerical predictions of the cavitating flow around two model scale propellers in uniform inflow are presented and discussed. The simulations are carried out using a commercial CFD solver. The homogeneous model is used and the influence of three widespread mass transfer models, on the accuracy of the numerical predictions, is evaluated. The mass transfer models in question share the common feature of employing empirical coefficients to adjust mass transfer rate from water to vapour and back, which can affect the stability and accuracy of the predictions. Thus, for a fair and congruent comparison, the empirical coefficients of the different mass transfer models are first properly calibrated using an optimization strategy. The numerical results obtained, with the three different calibrated mass transfer models, are very similar to each other for two selected model scale propellers. Nevertheless, a tendency to overestimate the cavity extension is observed, and consequently the thrust, in the most severe operational conditions, is not properly predicted.
15 June 2013 in International Journal of Simulation Modelling
This paper introduces the results of correlated numerical models study carried out to analyse cavitating flows. The flow field of steady attached sheet cavitation and the case of unsteady cavitation behaviour with quasi-periodic fluctuations is analysed with different homogenous cavitation transport models. Three models in form of additional transport equations for water volume fraction are combined with the RANS (Reynolds Averaged Navier–Stokes) equations and calibrated for the cavitating flow around the NACA66 (MOD) hydrofoil by means of an optimisation strategy. In the second stage, the optimised models are applied to the case of internal unsteady cavitating flow in Venturi type section.\ud The results obtained using calibrated models are very close to each other, and agree well with the available experimental data, indicating that the optimisation process is recommended as a general – first step tool for mathematical models validation
6 January 2015 in Journal of Physics: Conference Series