6 August 2015 in Procedia Engineering
The paper considers the peculiarities of structure forming in composite materials on the basis of polytetrafluoroethylene (PTFE) containing metals or polyimide while explosive processing of powder compositions by the ring shock front. The stepwise change of the structure in the center of pressing, accompanied by occurrence of nanodimensional phases, change of fine structure and increase of microhardness is determined. It is achieved under a certain combination of the explosive's parameters and powder composition's porosity.
9 November 2016 in Chemical and Petroleum Engineering
1 July 2020 in Inorganic Materials: Applied Research
In this paper, we study the features of structure formation in composite materials based on polytetrafluoroethylene containing from 50 to 90 vol % of nickel that results from the explosive pressing of powder mixtures in a cylindrical ampoule. It is revealed that, at an increase in parameters of explosive pressing, a change in the structure along the pressing radius that characterized by increased deformation of the components up to their grinding and remelting in the center of the pressing with a simultaneous increase in the physicochemical interaction of the components of the composite mixture is observed.
30 November 2018 in IOP Conference Series: Materials Science and Engineering
Metal filled composite materials on the basis of polytetrafluoroethylene (PTFE) are widely used in tribotechnical units of different equipment. Amongst the metal fillers for PTFE, aluminum is the most perspective, it has high thermal conductivity and low density, which is relevant for the aircraft industry. Due to low adhesion of PTFE to metals, the thermal conductivity and strength properties of these CM are low, so it is perspective to use explosive pressing (EP) which provides the conditions for an increase in physical-chemical interaction between CM components. The work researches the influence of EP on the structure, thermal expansion and thermal conductivity of composite materials on the basis of PTFE containing 10 and 30% vol. of aluminum. It has been established that EP, as well as sintering in a closed volume, contributes to a decrease in thermal expansion and an increase in the thermal conductivity of composite materials, which is connected to structural changes accompanied by an intensification of adhesive interfacial interaction. At the same time, with an increase in aluminum concentration, the efficiency of EP increases due to the increase in the number of contacts between metal particles, as well as the occurrence of an interphase zone, with peculiar properties.
18 February 2022 in Inorganic Materials: Applied Research
The features of structure formation in polytetrafluoroethylene filled with 10 and 30 vol % of aluminum after static and explosive pressing have been studied. It has been revealed that, after static pressing in the process of sintering, interfacial separation occurs, which is confirmed by the formation of structures of the “closed buds” type. After explosive pressing with sintering between polytetrafluoroethylene and aluminum, fibrils and a polymer layer covering the metal particles are found, and there is no interfacial separation, which indicates the formation of a strong adhesive bond and is confirmed by the formation of aluminum fluoride.
1 July 2018 in Inorganic Materials: Applied Research
In this paper, we carried out comparative experimental studies of the effect of static and explosive pressing on the thermal and electrical conductivity of composite materials based on Fluoroplast-4...