15 December 2025 in IEEE Transactions on Intelligent Transportation Systems
This study addresses the issue of communication link interruptions in train platoon control under the complex operating environment of high-speed railways. An adaptive trajectory tracking control approach based on a finite-time sliding mode is proposed under jointly connected switching topologies. The proposed framework ensures platoon consensus under jointly connected switching topologies, where the leader’s information need not reach all followers in each topology but only collectively over a finite interval, thus relaxing connectivity requirements and enhancing practicality. Within this framework, the sliding surface is designed to incorporate relative error signals determined by the communication topology, and an adaptive mechanism is employed to effectively handle unknown external disturbances without requiring prior knowledge of their bounds or derivatives. Simulation results demonstrate that, compared with MPC and non-adaptive approaches, the proposed strategy reduces position errors by approximately 80% and velocity errors by around 40%, significantly improving platoon tracking accuracy. Furthermore, simulations under both periodic and random topology switching indicate that periodic switching achieves performance closer to that of a fully connected topology, further enhancing trajectory tracking effectiveness.
1 January 2025 in IET Intelligent Transport Systems
Train platoon improves railway efficiency by coordinating train speeds and inter‐train distances. However, actuator delays pose a major challenge to maintaining safe dynamic spacing. This study develops a safety‐oriented framework that integrates hybrid control with reachable set estimation to explicitly compute the minimum safe separation under actuator delays. A unified modelling strategy is proposed that incorporates actuator delays together with real‐time acceleration disturbances of the leading train. By using forward reachable set analysis, the effect of actuator delays on position errors is estimated and incorporated into the controller to compensate for such delays, thereby improving the safety and robustness of train platoon tracking. The influence of actuator delays on safety during emergency braking scenarios is evaluated through simulation and field experiments. The results show that the forward reachable set of position errors expands as the actuator delays increase. The adoption of controller can reduce the influence of actuator delay on the safety margin by approximately 60%. Compared with the method of eliminating delay using the Lyapunov–Krasovskii functional method, the proposed method ensures the safety of the tracking distance of the train platoon.