1 January 2017 in Nano Energy
29 July 2022 in Energy & Environmental Science
Reducing cathode porosity is essential to balancing the electrolyte distribution in lithium–sulfur (Li–S) cells, conserving more pore-filling electrolyte to extend cell cycle life. However, low-porosity electrodes built with nanosized sulfur/carbon (S/C) materials suffer from high tortuosity that significantly deteriorates electrode wetting and hence sulfur utilization. Enabling operation of high-loading sulfur electrodes under both low-porosity and lean-electrolyte conditions is still a challenge and is seldom discussed. In this study, we demonstrated a facile strategy for constructing low-tortuosity through-pores across both vertical and planar directions of electrodes by casting large particles into single-particle-layer electrodes. Through multi-scale characterizations and simulations, correlations between material/electrode structures, electrolyte permeability, polysulfide migration, and sulfur reactions were elucidated. The high-loading and dense sulfur cathode fabricated by this method delivers a high specific capacity (>1000 mA h g−1) at a very low electrolyte/sulfur (E/S) ratio of 4 μL mg−1. This study provides a practical approach to reducing the tortuosity of dense sulfur electrodes by manipulating the porosity distribution, which would be also applicable to improving the rate capability of other high-energy electrodes.
24 December 2023 in Energy Storage Materials
18 May 2022 in Powder Diffraction
The crystal structure of baricitinib has been solved and refined using synchrotron X-ray powder diffraction data and optimized using density functional techniques. Baricitinib crystallizes in space group I 2/ a (#15) with a = 11.81128(11), b = 7.06724(6), c = 42.5293(3) Å, β = 91.9280(4)°, V = 3548.05(5) Å 3 , and Z = 8. The crystal structure is characterized by hydrogen-bonded double layers parallel to the ab -planes. The dimers form a graph set R2,2(8). The sulfone ends of the molecules reside in the interlayer regions. The powder pattern has been submitted to ICDD for inclusion in the Powder Diffraction File™ (PDF ® ).
22 November 2024 in ECS Meeting Abstracts
Lithium metal batteries have seen dramatic advancement over the last 5 years. In realistic cell designs the ability to achieve both high energy and long cycle life have been demonstrated using constant current cycling. Based on the observed performance the timing is right for more detailed analysis of some of these promising systems in more realistic use cases including calendar aging and using interspersed charge and discharge pulses which mirror vehicle acceleration and regeneration. In a combination of studies it has been found that shifts to these use cases present both significant promise for the current technical approaches as well as distinct challenges which will need to be addressed for future implementation in long range, high performing electric vehicles. This discussion will focus on a few of these key findings and present options to continue the advancement of high energy Li metal batteries.
9 August 2024 in ECS Meeting Abstracts
Lithium-Sulfur (Li-S) batteries are promising candidates for electric vehicle applications due to their very high theoretical specific capacity (1670 mAh/g) and the tremendous availability and low cost of elemental sulfur. However, their practical capacity is substantially smaller (~1000 mAh/g) and their cycling performance is hindered by numerous technical challenges caused by issues on both cathode and anode sides of the system. While Li-S cells with extended cycling lifetimes can be built, they are typically only effective when using excess electrolytes and applied pressure, limiting their utility for practical applications. To gain deeper insights into the origin of missing capacity and the capacity fade of Li-S cells, we conducted operando studies on Li-S pouch cell batteries using synchrotron powder diffraction techniques. This approach enabled us to sensitively track the various crystalline phases involved in the cycling of Li-S batteries and to resolve a variety of inhomogeneities within cells that may affect their performance and lifetime.