13 August 2025 in Science Robotics
Soft robots, with their compliant bodies, minimal environmental disturbance, and ability to withstand ambient pressures, offer promising solutions for deep-sea exploration. However, a common challenge of stiffening in soft materials impairs their effective actuation in harsh conditions. In this work, we integrated a liquid dielectric plasticizer within an electrohydraulic soft robot, serving dual critical functions as a softening agent to maintain the softness of the polymer shell and an electrohydraulic fluid for efficient actuation. In addition, by using the surrounding seawater as alternating electrodes, we prevented charge retention in dielectric layers, enabling sustained actuation performance. Field tests at depths of ~1360, 3176, and ~4071 meters confirmed the robot’s ability to sense the environment, navigate complex trajectories, and withstand unsteady disturbances. Our work offers a generalized and straightforward framework for developing soft materials tailored for deep-sea applications, paving the way for soft robots to execute real-world missions.
26 January 2021 in IEEE Photonics Technology Letters
Electric current sensors are widely utilized in high-frequency power and electronic circuits which spread over numerous industries. Here, a current sensor based on the high-Q whispering gallery mode optical capillary microresonator filled with Terfenol-D nanoparticles is experimentally demonstrated. The device shows a peak AC current sensitivity of 5.285 μA Hz -1/2 with a corresponding high accuracy of 0.0009%. It possesses a wide detection frequency bandwidth of approximately 12 MHz and exhibits good linearity, enabling for partial discharge signals detection.
1 October 2023 in AIP Advances
Spiking Neural Networks (SNNs) that require synapse weight initialization using random numbers have been widely used in the neural morphological system. However, the random numbers generated by traditional digital circuits have certain repeatability, and the entire computing architecture has issues such as high resource consumption and low integration. In this letter, a hardware system for true random number generation is realized through integrating a magnetic tunnel junction, a memory cell of MRAM (magnetic random access memory) chips, with an interface circuit and using the same mechanism as writing data in spin transfer torque MRAM. The generated true random numbers are evaluated using NIST SP800-22 standard and are used for synapse weight initialization in an SNN system. The recognition rate of the system initialized by the generated true random numbers is about 84% for an MNIST handwritten digit dataset, which is 2%–3% higher than that using a traditional linear feedback shift register. The reported work provides a new approach for better SNN performance.
18 December 2019 in IEEE Transactions on Magnetics
Stability and reliability are two main concerns for the spin torque oscillator (STO) being used as a microwave generator in the microwave-assisted magnetic recording. Using micromagnetic simulation, we investigated the STO stability against the head gap field and the stray field from the recording media as a function of STO reference-layer properties. It is found that the $K_{u}$ of the reference layer, the gap field, and the media stray field have great effects on the STO stability. In addition, we addressed the key issues of STOs under high current which are required for generating high enough oscillation frequency for effective writing, including high-current induced STO instability and thermally agitated disturbance on STO. The results show that the damping constant of the field generation layer (FGL) of STO not only plays a key role in reducing the driving current but also is a deterministic parameter on the enhancement of STO stability. Possible approaches to enhancing STO stability are proposed.