3 February 2015 in Arabian Journal for Science and Engineering
1 September 2021 in KSCE Journal of Civil Engineering
To study the corrosion cracking process of reinforced concrete under the combined effects of chloride and fatigue loading, the constan-current and dry-wet cycle accelerated corrosion method was used to corrosion the specimens under different stress levels for different time. The quality loss of reinforcement, the composition of corrosion products and the cracking of concrete are analyzed from the macro, micro and micro scales, and to obtain the spatial distribution as well as microscopic characteristics of corrosion products of the reinforcement bar under coupling conditions. Additionally, a model of steel rust cracking under the coupled action of chloride and fatigue loading is established. The results show that: Under the same corrosion time, the concrete cracking and steel corrosion degree become more serious with the increase of stress level. The greater the stress level, the earlier corrosion occurs and the more corrosion products are, Moreover, due to the fatigue load, the concrete on the upper side of the steel bar has rust expansion cracks earlier than the lower side.
27 January 2020 in European Journal of Environmental and Civil Engineering
In this study, pre-stressed concrete (PC) piles were reinforced with high-strength basalt fibre-reinforced polymer (BFRP) bars and steel bars to improve their flexural strengths and behaviours. Full-scale specimens with total lengths of 12000 mm and diameters of 600 mm were constructed and implemented with bending tests. Efforts were made to evaluate effects of non-prestressed reinforcement type and longitudinal reinforcement ratio on flexural performances of specimens. Meanwhile, J-factors were calculated to quantify deformability of all specimens. It’s experimentally demonstrated that PC piles reinforced with BFRP bars exhibit much higher flexural capacity than those with steel bars. Moreover, cross sections of all specimens basically conformed to the assumption of plane section. Failures of PC piles reinforced with BFRP bars were attributed to gradual concrete crushing, while those with steel bars were speculated to result from excessive crack width. A simplified method for predicting flexural capacities of PC piles reinforced with BFRP bars was proposed. The predicted flexural capacities using the proposed method were in good agreement with the experimental results. Results of this study were expected to provide theoretical basis for broadened engineering applications of PC piles reinforced with hybrid BFRP bars and steel bars in marine structures.
25 November 2022 in Applied Mathematical Modelling
1 July 2021 in Arabian Journal of Geosciences