8 January 2024 in IEEE Transactions on Power Delivery
The rated current and short-circuit current of the large-capacity generator circuit breaker (GCB) far exceed the limit of a single vacuum circuit breaker (VCB). In this paper, a large-capacity GCB scheme based on multiple VCBs in parallel was proposed, focusing on the parallel current-sharing characteristics. Firstly, the current-sharing path and current transfer path were clarified, and a complete and specific circuit model was established. Secondly, the product variability of the vacuum interrupter (VI) and the action dispersion of the operating mechanism would cause the “current unbalance” problem. The influence rule of impedance matching, arc voltage, arcing synchronization, and other factors on the current-sharing characteristics was studied in detail, and the method that can effectively improve the static and dynamic current-sharing was proposed. In addition, the phase-to-phase electromagnetic field would cause the current of each VI in single-phase GCB to have an obvious phase difference, which greatly reduced the current-sharing effect. The electromagnetic shielding shell (ESS) installed on the GCB could effectively shield the external electromagnetic field and significantly improve the current-sharing effect. The improved ESS significantly reduced phase-to-phase magnetic leakage and avoided magnetic field pollution. Finally, the current-sharing experiment of the prototype proved that the proposed scheme could achieve a better parallel current-sharing effect, which may initially solve the problem of the insufficient current carrying capacity of the VCB.
10 May 2021 in High Voltage
Stray magnetic fields with a fixed frequency of 50/60 Hz are ubiquitous in buildings, factories, and power system equipment. Researchers are increasingly focusing on harvesting electrical energy from stray magnetic fields to provide sustainable energy for the Internet of Things (IoT) devices. Magneto‐mechano‐electric energy conversion is the most efficient way to convert low‐frequency stray magnetic fields into electricity. In this study, we proposed a hybrid piezo/triboelectric nanogenerator (HP/TENG) on the basis of a cantilever beam to use stray magnetic fields from the surrounding environment. The hybrid nanogenerator provided high output voltage/current and power of ∼176 V/375 μA and 4.7 mW (matched impedance of 20 kΩ) in a magnetic field environment of 4 Oe. The device provided a stable 3.6 V direct current output by incorporating energy management circuitry to sustainably drive power to commercial wireless temperature/humidity sensors. The HP/TENG has a significant application potential in IoT, which can use stray magnetic energy and a power wireless sensor system.