The heteroepitaxial growth and phase formation of Ga2O3 on Al-polar AlN(0001) templates by molecular-beam epitaxy (MBE) are studied. Three different MBE approaches are employed: (i) conventional MBE, (ii) suboxide MBE (S-MBE), and (iii) metal-oxide-catalyzed epitaxy (MOCATAXY). We grow phase-pure β-Ga2O3(2̄01) and phase-pure ϵ/κ-Ga2O3(001) with smooth surfaces by S-MBE and MOCATAXY. Thin film analysis shows that the crystallographic and surface features of the β-Ga2O3(2̄01)/AlN(0001) and ϵ/κ-Ga2O3(001)/AlN(0001) epilayers are of high crystalline quality. Growth and phase diagrams are developed to synthesize Ga2O3 on AlN by MBE and MOCATAXY and to provide guidance to grow Ga2O3 on several non-oxide surfaces, e.g., AlN, GaN, and SiC, by MBE, S-MBE, and MOCATAXY.
Tailoring the shape of complex nanostructures requires control of the growth process. In this work, we report on the selective growth of nanostructured tin oxide on gallium oxide nanowires leading to the formation of SnO2/Ga2O3 complex nanostructures. Ga2O3 nanowires decorated with either crossing SnO2 nanowires or SnO2 particles have been obtained in a single step treatment by thermal evaporation. The reason for this dual behavior is related to the growth direction of trunk Ga2O3 nanowires. Ga2O3 nanowires grown along the [001] direction favor the formation of crossing SnO2 nanowires. Alternatively, SnO2 forms rhombohedral particles on [110] Ga2O3 nanowires leading to skewer-like structures. These complex oxide structures were grown by a catalyst-free vapor–solid process. When pure Ga and tin oxide were used as source materials and compacted powders of Ga2O3 acted as substrates, [110] Ga2O3 nanowires grow preferentially. High-resolution transmission electron microscopy analysis reveals epitaxial relationship lattice matching between the Ga2O3 axis and SnO2 particles, forming skewer-like structures. The addition of chromium oxide to the source materials modifies the growth direction of the trunk Ga2O3 nanowires, growing along the [001], with crossing SnO2 wires. The SnO2/Ga2O3 junctions does not meet the lattice matching condition, forming a grain boundary. The electronic and optical properties have been studied by XPS and CL with high spatial resolution, enabling us to get both local chemical and electronic information on the surface in both type of structures. The results will allow tuning optical and electronic properties of oxide complex nanostructures locally as a function of the orientation. In particular, we report a dependence of the visible CL emission of SnO2 on its particular shape. Orange emission dominates in SnO2/Ga2O3 crossing wires while green-blue emission is observed in SnO2 particles attached to Ga2O3 trunks. The results show that the Ga2O3–SnO2 system appears to be a benchmark for shape engineering to get architectures involving nanowires via the control of the growth direction of the nanowires.
27 September 2016 in Semiconductor Science and Technology
Gallium oxide microrods have been grown by an evaporation-deposition method by using a precursor containing lithium in order to check the influence of such dopant on the morphology and physical properties of the obtained β -Ga 2 O 3 structures. SEM studies show that the morphology is modified with respect to undoped gallium oxide, promoting the growth of micropyramids transversal to the microwire axis. Raman analysis reveals good crystal quality and an additional Raman peak centred at around 270 cm −1 , characteristic of these samples and not present in undoped monoclinic gallium oxide. The presence of the Li + ions also influences the luminescence emission by inducing a red-shift of the characteristic UV-blue defect band of gallium oxide. In addition, an intense sharp peak centred around 717 nm observed both by cathodoluminescence (CL) and photoluminescence (PL) is also attributed to the presence of these ions. The Li related luminescence features have also been investigated by PL excitation (PLE) spectra and by the temperature dependence of the luminescence.
The growth of α-Ga2O3 and α-(InxGa1−x)2O3 on m-plane α-Al2O3(101̄0) by molecular beam epitaxy (MBE) and metal-oxide-catalyzed epitaxy (MOCATAXY) is investigated. By systematically exploring the parameter space accessed by MBE and MOCATAXY, phase-pure α-Ga2O3(101̄0) and α-(InxGa1−x)2O3(101̄0) thin films are realized. The presence of In on the α-Ga2O3 growth surface remarkably expands its growth window far into the metal-rich flux regime and to higher growth temperatures. With increasing O-to-Ga flux ratio (RO), In incorporates into α-(InxGa1−x)2O3 up to x ≤ 0.08. Upon a critical thickness, β-(InxGa1−x)2O3 nucleates and, subsequently, heteroepitaxially grows on top of α-(InxGa1−x)2O3 facets. Metal-rich MOCATAXY growth conditions, where α-Ga2O3 would not conventionally stabilize, lead to single-crystalline α-Ga2O3 with negligible In incorporation and improved surface morphology. Higher TTC further results in single-crystalline α-Ga2O3 with well-defined terraces and step edges at their surfaces. For RO ≤ 0.53, In acts as a surfactant on the α-Ga2O3 growth surface by favoring step edges, while for RO ≥ 0.8, In incorporates and leads to a-plane α-(InxGa1−x)2O3 faceting and the subsequent (2̄01) β-(InxGa1−x)2O3 growth on top. Thin film analysis by scanning transmission electron microscopy reveals highly crystalline α-Ga2O3 layers and interfaces. We provide a phase diagram to guide the MBE and MOCATAXY growth of single-crystalline α-Ga2O3 on α-Al2O3(101̄0).
Optical microcavities are key elements in many photonic devices, and those based on distributed Bragg reflectors (DBRs) enhance dramatically the end reflectivity, allowing for higher quality factors and finesse values. Besides, they allow for wide wavelength tunability, needed for nano- and microscale light sources to be used as photonic building blocks in the micro- and nanoscale. Understanding the complete behavior of light within the cavity is essential to obtaining an optimized design of properties and optical tunability. In this work, focused ion-beam fabrication of high refractive-index contrast DBR-based optical cavities within microwires grown and doped by the vapor-solid mechanism is reported. Room-temperature microphotoluminescence spectra show strong modulations from about 650 nm up to beyond 800 nm due to the microcavity resonance modes. Selectivity of the peak wavelength is achieved for two different cavities, demonstrating the tunability of this kind of optical system. Analysis of the confined modes is carried out by an analytical approximation and by finite-difference–time-domain simulations. A good agreement is obtained between the reflectivity values of the DBRs calculated from the experimental resonance spectra, and those obtained by finite-difference–time-domain simulations. Experimental reflectivities up to 70% are observed in the studied wavelength range and cavities, and simulations demonstrate that reflectivities up to about 90% could be reached. Therefore, high-reflectivity optical microcavities are shown as good candidates for single-material-based, widely tunable light emitters for micro- and nanodevices.
23 March 2023 in Japanese Journal of Applied Physics
We report the growth of α-Ga2O3 on m-plane α-Al2O3 by conventional plasma-assisted molecular-beam epitaxy and In-mediated metal–oxide-catalyzed epitaxy (MOCATAXY). We report a growth rate diagram for α-Ga2O3( ), and observe (i) a growth rate increase, (ii) an expanded growth window, and (iii) reduced out-of-plane mosaic spread when MOCATAXY is employed for the growth of α-Ga2O3. Through the use of In-mediated catalysis, growth rates over 0.2 μm h−1 and rocking curves with full width at half maxima of Δω ≈ 0.45° are achieved. Faceting is observed along the α-Ga2O3 film surface and explored through scanning transmission electron microscopy.