In this study, the role of active layer thickness, hole transport layer thickness, and electron mobility on the performance of P3HT: PCBM-based inverted organic solar cells has been investigated. The simulation has been done for device structure ITO/ZnO/P3HT: PCBM/MoO3/Ag using the general-purpose photovoltaic device model (GPVDM) program tool. The short circuit current density (Jsc), open circuit voltage (Voc), fill factor (FF), and power conversion efficiency (PCE) of the cell were determined by varying the thickness of the active layer from 140nm to 260nm, the hole transparent layer from 10nm to 40nm, and electron mobility from 0.5×10−3cm2V−1s−1 to 6.5×10−3cm2V−1s−1. The PCE improvement was observed at 220nm and 20nm active layer and hole transporting layer thickness, respectively, for 4.5×10−3cm2V−1s−1 electron mobility. The results confirmed that the thickness of the active layer, hole transport layer, and charge carrier mobility plays an important role in the performance improvement of organic solar cells.