25 November 2019 in The Journal of Engineering
In this article, a fault tolerant controller (FTC) based on back‐stepping sliding mode is proposed for a quadrotor unmanned aerial vehicle (UAV) with single‐rotor failure. According to the working mechanism of the quadrotor, the control system of UAV is divided into position subsystem and attitude subsystem. Then, the yaw control is abandoned because of the increased underactuation. The controller is designed by the back‐stepping sliding mode control (BSMC). BSMC is robust to system uncertainties and external disturbances. Sliding mode reaching law is designed. Therefore, it can reduce system chattering. Based on the Lyapunov function method, the proposed FTC approach makes the faulty UAV stable and realises position control accuracy. Finally, simulation results show that the quadrotor UAV can reach the desired position and maintain the hover state, which verifies the effectiveness of the proposed method.
4 July 2019 in Fusion Engineering and Design
6 April 2020 in International Journal of Energy Research
30 July 2015 in Journal of Fusion Energy
12 March 2018 in International Journal of Energy Research
19 May 2016 in IOP Conference Series: Materials Science and Engineering
Pump is a key sub-system which drives the heavy liquid metal circulation in experimental loops. In the paper, the hydraulic and mechanical performances of an electromagnetic pump (EMP) were tested in the liquid metal test facility named PREKY-I. The test results showed that the EMP worked at good state when the working current was up to 170 ampere. In this condition, the flow rate was 5m3/h, and pressure head 7.5bar, when the outlet temperature was kept at 380°C during the test. The performance was close to the expected design parameters. The EMP had run continuously for 200 hours with stable performance. From the test results, the EMP could be used in KYLIN-II loop, which is the upgrade liquid metal test loop of PREKY-I.