Aktuelle Trends in der Umformtechnik zeigen einen zunehmenden Automatisierungsgrad und eine steigende Anforderung an die Genauigkeit der Schmiedestücke. Während des Umformprozesses treten hohe Kräfte auf, die zu einer deutlichen Verformung der Umformmaschine führen. Dies wird in der Regel bei der Prozessauslegung nicht berücksichtigt. Dieser Beitrag widmet sich der Untersuchung des Einflusses der elastischen Verformung der energiegebundenen Umformmaschine auf Prozessparameter und Defektbildung beim Warmschmieden. Recent trends in metalforming show an increasing degree of automation and demand for accurate forgings. High forces occuring during the forming process lead to a significant deflection of the forming machine, which is usually not considered in process development. The paper examines how elastic deformation of the energy-bound forming machine affects process parameters and defect formation during hot forging.
Numerical simulation, particularly through the Finite Element Method (FEM), is widely applied in the design and optimization of metal forming processes. However, certain real-process effects are not fully captured by numerical models alone, creating a need for complementary data-driven approaches. This study presents a hybrid modelling framework that integrates FEM simulations with machine-data-based predictive modelling to improve defect prediction in hot forging. Experimental data were collected from automated forging trials on an SMS SPPE 6.3 screw press equipped with position, force, strain, acceleration, and frame-deflection sensors. A series of trials with varied process parameters enabled the development of a data-driven classification model for detecting the “underfilling” defect. In parallel, the FEM model was refined by incorporating additional real-process phenomena, including ram tilt, press-frame deflection, and air entrapment in die cavities. The combined approach significantly enhanced defect prediction accuracy and provided deeper insight into the mechanisms driving defect formation. These results demonstrate the effectiveness of hybrid numerical–data-driven modelling for improving the robustness of metal forming process design.