Current anchorage systems for poles, lighting columns, etc., have an inherent strength that causes serious injuries, and even death, in cases of vehicle impact. This article explores the deficiency of traditional anchorage systems and explains the development of a new anchorage system over the different phases, such as design conditions, FEM analysis, dynamic testing and actual crash tests. The behaviour of the traditional and new anchorage systems are compared, including the use of a data acquisition system and a high-speed camera. The aim of this study was to develop a new non-energy-absorbing anchorage system, adaptable to lighting poles, signposts, etc., and to evaluate the decrease in primary injuries with the employment of this system.
In this paper, an evaluation of distribution of the air pressure is determined throughout the laterally closed industrial buildings with curved metallic roofs due to the wind effect by the finite element method (FEM). The non‐linearity is due to Reynolds‐averaged Navier‐Stokes (RANS) equations that govern the turbulent flow. The Navier‐Stokes equations are non‐linear partial differential equations and this non‐linearity makes most problems difficult to solve and is part of the cause of turbulence. The RANS equations are time‐averaged equations of motion for fluid flow. They are primarily used while dealing with turbulent flows. Turbulence is a highly complex physical phenomenon that is pervasive in flow problems of scientific and engineering concern like this one. In order to solve the RANS equations a two‐equation model is used: the standard k−ε model. The calculation has been carried out keeping in mind the following assumptions: turbulent flow, an exponential‐like wind speed profile with a maximum velocity of 40 m/s at 10 m reference height, and different heights of the building ranging from 6 to 10 meters. Finally, the forces and moments are determined on the cover, as well as the distribution of pressures on the same one, comparing the numerical results obtained with the Spanish CTE DB SE‐AE, Spanish NBE AE‐88 and European standard rules, giving place to the conclusions that are exposed in the study.