26 July 2017 in Journal of Physics: Conference Series
30 January 2019 in IEEE Transactions on Applied Superconductivity
The study of next generation high energy accelerators based on 16 T dipoles has emphasized the need for higher performance, cost-effective $Nb_{3}Sn$ superconducting wires. A Conductor Development Program aiming to reach a non-copper critical current density ( $J_{c}$ ) of 1500 $A/mm^2$ at 16 T and 4.2 K has been launched by CERN, with the involvement of industry and laboratories worldwide. In this article, the targets and strategy of the program are presented, with an overview of the wire layouts and development activities being pursued by each partner, and the latest characterization results are reported. Three of the four participating manufacturers have successfully reached the first stage $J_{c}$ milestone, but a significant advance is still needed to achieve the final target. The next steps are briefly discussed, as the program focuses increasingly on novel alloys and methods to maximize $J_{c}$ .
9 March 2021 in Journal of Physics: Materials
The inhibition of Nb3Sn grain growth in the presence of ZrO2 nanoparticles appears to be one of the most promising method for pushing the critical current densities of Nb3Sn superconducting wires to levels that meet the requirements set for the Future Circular Collider. We have investigated the effect of ZrO2 nanoparticles formed by the internal oxidation of Zr on the superconducting properties and microstructure of Nb3Sn formed from Nb-1 wt%Zr, Nb-7.5 wt%Ta, Nb-7.5 wt%Ta-1 wt%Zr and Nb-7.5 wt%Ta-2 wt%Zr alloys. A monofilamentary wire configuration was used, with a 0.22 mm outer diameter Nb-alloy tube containing a core of powdered metal oxide (SnO2, CuO or MoO3) as oxygen source and successive deposits of Cu, Sn and Cu on the outer surface. As determined from inductive measurements, the layer critical current densities of the samples based on Nb alloys with internally oxidized Zr were superior to those based on Nb-7.5 wt%Ta. The samples based on Nb-7.5 wt%Ta-1 wt%Zr and Nb-7.5 wt%Ta-2 wt%Zr showed higher critical current densities at high magnetic fields (above 10–15 T), and upper critical fields exceeding 28.5 T at 4.2 K (99% normal state resistivity criterion). A record value of 29.2 T of the upper critical field at 4.2 K was obtained on samples based on Nb-7.5 wt%Ta-2 wt%Zr. Hypotheses are proposed and discussed for explaining this unexpected increase of the upper critical field, by considering the possible effects of non-oxidized Zr on the superconducting properties of Nb3Sn and of the oxidized Zr on the formation and microchemistry of Nb3Sn. Regardless of sample type the Nb3Sn grains observed in our samples have an aspect ratio of 1.5–1.7. When compared in the short axis direction, the mean distance between grain boundary intercepts (lineal intercept method) is ∼40% smaller in the samples with internally oxidized Zr than in the reference samples based on Nb-7.5 wt%Ta. In the long axis direction the reduction is of 20%–30%.
2 February 2022 in IEEE Transactions on Applied Superconductivity
Next generation ion therapy magnets both for gantry and for accelerator (synchrotron) are under investigation in a recently launched European collaboration that, in the frame of the European H2020 HITRI plus and I.FAST programmes, has obtained some funding for work packages on superconducting magnets. Design and technology of superconducting magnets will be developed for ion therapy synchrotron and -especially- gantry, taking as reference beams of 430 MeV/nucleon ions (C-ions) with 10 10 ions/pulse. The magnets are about 60–90 mm diameter, 4 to 5 T peak field with a field change of about 0.3 T/s and good field quality. The paper will illustrate the organization of the collaboration and the technical program. Various superconductor options (LTS, MgB 2 or HTS) and different magnet shapes, like classical CosTheta or innovative Canted CosTheta (CCT), with curved multifunction (dipole and quadrupole), are under evaluation, CCT being the baseline. These studies should provide design inputs for a new superconducting gantry design for existing facilities and, on a longer time scale, for a brand-new hadron therapy centre to be placed in the South East Europe (SEEIIST project).
12 February 2018 in IEEE Transactions on Applied Superconductivity
In order to achieve higher magnetic fields and/or larger magnet apertures, next generation of accelerator magnets will be based on high-J$_c$Nb$_3$Sn Rutherford cables. For the High-Luminosity LHC project (HL-LHC), CERN is manufacturing dipole and quadrupole magnets based on state-of-the-art high-J$_c$Nb$_3$Sn superconductor. Furthermore, a design study has been launched to develop 16 T Nb$_3$Sn magnets in the framework of the Future Circular Collider (FCC). These magnets will require pre-stresses significantly larger than 100 MPa. In particular, the FCC 16T dipoles are presently designed assuming a stress on the superconductor of up to 200 MPa. Because Nb$_3$Sn has extreme sensitivity to strain, these high values of stress are a significant challenge for the superconductor and the design of the magnets. In the framework of the European-Circular-Energy-Frontier-Collider Study project (EuroCirCol), a conceptual design study for FCC, CERN has launched a campaign of critical current measurements of Nb$_3$Sn Rutherford cables under transverse loads up to 200 MPa. These measurements are carried out on 2-m-long samples in the FRESCA test station, where background magnetic fields up to 10 T can be applied. In this paper, we report and discuss the results obtained on 18-strand 10-mm-wide cable samples based on a 1-mm-diameter RRP® wire.
16 January 2013 in IEEE Transactions on Applied Superconductivity
High critical current density Nb3Sn wires (Jc > 2500 A/mm2 at 4.2 K and 12 T) are the conductors considered for next-generation accelerator magnets. At present, the large magnetization of these strands is a concern within the scientific community because of the impact it might have on the magnet field quality. In order to characterize the magnetic behavior of these wires, an extensive campaign of magnetization measurements was launched at CERN. Powder-in-tube strands by Bruker-EAS and Restacked Rod Process strands by Oxford Superconducting Technology were measured between 0 and 10.5 T at different temperatures (ranging from 1.9 to 14.5 K). The samples, based on strands with different subelements dimensions (35 to 80 μm), were measured with a vibrating sample magnetometer. The experimental data were analyzed to: (1) calculate the effective filament size and the optimal parameters for the pinning force scaling law and (2) define the field-temperature region where there are flux jumps. It was found that the flux-jump can limit the maximum magnetization of the Nb3Sn wires and that the maximum magnetization at higher temperatures can be larger than the one at lower temperatures. In this paper, the experimental results and the analysis are reported and discussed.