12 July 2018 in IEEE Transactions on Antennas and Propagation
A reconfigurable antenna (RA) capable of steering its beam into the hemisphere corresponding to θ ∈ {-40°, 0°, 40°}, φ ∈ {0°, 45°, 90°, -45°}, and of changing 3 dB beamwidth, where θ 3 dB ∈ (40°, 100°), φ ∈ {45°, 90°, -45°} for broadside direction is presented. The RA operating in 5 GHz band consists of a driven patch antenna with a parasitic layer placed above it. The upper surface of the parasitic layer has two pixelated metallic strips, where each strip has four pixels. The pixels connected via p-i-n diode switches enable to change the current distribution on the antenna providing the desired modes of operation. A prototype RA was characterized indicating an average gain of 8 dB. Measured and simulated impedance and radiation patterns agreed well. The proposed RA offers an efficient solution by using less number of switches compared to other RAs. The system level simulations for a 5G orthogonal frequency division multiple access system show that the RA improves capacity/coverage tradeoff significantly, where the RA modes and users are jointly determined to create proper beamwidth and directivity at the access point antennas. For a hotspot scenario, the presented RA provided 29% coverage and 16% capacity gain concurrently.
29 September 2017 in IEEE Transactions on Antennas and Propagation
The design, prototyping, and characterization of a radiation pattern reconfigurable antenna (RA) targeting 5G communications are presented. The RA is based on a reconfigurable parasitic layer technique in which a driven dipole antenna is located along the central axis of a 3-D parasitic layer structure enclosing it. The reconfigurable parasitic structure is similar to a hexagonal prism, where the top/bottom bases are formed by a hexagonal domed structure. The surfaces of the parasitic structure house electrically small metallic pixels with various geometries. The adjacent pixels are connected by PIN diode switches to change the geometry of the parasitic surface, thus providing reconfigurability in the radiation pattern. This RA is designed to operate over a 4.8–5.2 GHz frequency band, producing various radiation patterns with a beam-steering capability in both the azimuth ( $0 {^{\circ }} <\phi < 360 {^{\circ }}$ ) and elevation planes ( $-18 {^{\circ }} <\theta < 18 {^{\circ }}$ ). Small-cell access points equipped with RAs are used to investigate the system level performances for 5G heterogeneous networks. The results show that using distributed mode optimization, RA equipped small-cell systems could provide up to 29% capacity gains and 13% coverage improvements as compared to legacy omnidirectional antenna equipped systems.
2 August 2018 in IEEE Transactions on Wireless Communications
MU-MIMO transmission relies on exploiting multi-user diversity among a multitude of users. In this paper, to enhance MU-MIMO transmission, techniques for designing and exploiting reconfigurable antennas (RAs) are developed. A single-element RA is capable of generating modes with different radiation pattern and polarization states resulting in multiple different channel states for each user. This capability expands the search space for user-pairing optimization. To reduce complexity, an iterative user and antenna mode selection algorithm is proposed. Based on parasitic tuning, an RA optimized for MU-MIMO transmission and capable of creating four pattern types is designed using a genetic algorithm and full-wave electromagnetic analyses. Pattern- and channel-aware mode-set generation methods are developed, where mode groups are determined to reduce channel estimation overhead and mode selection complexity while achieving superior performance. Simulation results indicate that the proposed schemes need a lower number of users and/or relax user selection requirements to benefit from MU-MIMO transmissions. It is also seen that more legacy antennas are needed to achieve similar MU-MIMO performance provided by the RA system. Simulations show up to 16-dB signal-to-noise ratio gains for a single cell with 12 users, where the base station has four RAs and four single-antenna users are simultaneously served via MU-MIMO transmission.
30 October 2018 in IEEE Transactions on Vehicular Technology
Space-shift-keying (SSK) and spatial modulation (SM) enable multiple antenna transmission systems to convey information on antenna indices. While SSK/SM help reduce number of radio frequency (RF) chains, large numbers of antennas and low correlations are required to achieve high data rates. This work investigates the use and design of multifunctional reconfigurable antennas (MRAs) for SSK/SM based transmission where a single-element MRA generates large numbers of modes. To enhance legacy SSK/SM performance while reducing RF hardware complexity, we propose single- and multi-carrier antenna mode-shift keying (MoSK) and mode modulation (MoM) schemes facilitated by MRAs. Based on an error probability analysis, we determine criteria for MRA design and mode set selection suitable for MoSK/MoM. We develop two MRA designs and investigate their performances over Rayleigh fading channels. By creating MRA modes with low pattern correlations, channel correlations can be reduced to improve detection performance. Extensive simulations demonstrate that MoSK/MoM performance exceeds that of SSK/SM along with significant complexity reduction. For instance, a single-carrier MoSK/MoM using a single MRA with 8 modes achieves about 2 dB gain compared to legacy SSK/SM requiring 8 antennas, and by multi-carrier MoSK/MoM using 4 subcarriers, an MRA with 32 modes can attain error performance comparable to this single-carrier system.