12 July 2018 in IEEE Transactions on Antennas and Propagation
A reconfigurable antenna (RA) capable of steering its beam into the hemisphere corresponding to θ ∈ {-40°, 0°, 40°}, φ ∈ {0°, 45°, 90°, -45°}, and of changing 3 dB beamwidth, where θ 3 dB ∈ (40°, 100°), φ ∈ {45°, 90°, -45°} for broadside direction is presented. The RA operating in 5 GHz band consists of a driven patch antenna with a parasitic layer placed above it. The upper surface of the parasitic layer has two pixelated metallic strips, where each strip has four pixels. The pixels connected via p-i-n diode switches enable to change the current distribution on the antenna providing the desired modes of operation. A prototype RA was characterized indicating an average gain of 8 dB. Measured and simulated impedance and radiation patterns agreed well. The proposed RA offers an efficient solution by using less number of switches compared to other RAs. The system level simulations for a 5G orthogonal frequency division multiple access system show that the RA improves capacity/coverage tradeoff significantly, where the RA modes and users are jointly determined to create proper beamwidth and directivity at the access point antennas. For a hotspot scenario, the presented RA provided 29% coverage and 16% capacity gain concurrently.
24 December 2018 in IEEE Transactions on Antennas and Propagation
Patient monitoring of vital signals such as breathing rhythm and heart beat rate can be done remotely by the use of a radar system. This approach is advantageous since it does not require any contact with the patient. Obviously contactless monitoring results in a more comfortable situation for the patient, and in occasions it is almost mandatory as in the case of heavy burnt or newborn patients. Moreover, additional information such movement patterns are also available. A 120 GHz FMCW radar is described with special focus on the design, construction and testing of a specific reflector antenna for the system. The system is based on a commercial radar chipset that includes its own antennas. The challenge has been to design the optimum reflector and to build it and test it in a cost effective way. The reflector has been 3D printed and a near-field testing technique has been implemented to assess its performance. The results show that the system is able to measure the vital signs at distances beyond one meter.
18 May 2021 in IEEE Antennas and Wireless Propagation Letters
In this letter, a reconfigurable dual-polarized broadband antenna with beam-steering capabilities using a parasitic layer is proposed for 5G new radio (NR) frequency range 1 (FR-1) applications. The antenna is a dual-port aperture-stacked patch structure with symmetrical orthogonal (horizontal and vertical) currents. The beam-steering is achieved by a pair of reconfigurable cross-shaped parasitic strips, which bestow the antenna three main beam directions θ = { ~ -25 ° ,0 ° , ~ 25 ° }, Ψ = {0 ° } with pointing and gain ($ 7$ dB) stability across a 30% impedance bandwidth (S 11 , S 22 <; -10 dB) from 3.2 - 4.3 GHz for both ports/polarizations. A prototype of the antenna is manufactured and measured demonstrating results in accordance with simulation expectations.
6 June 2008 in IEEE Transactions on Antennas and Propagation
Optical beamforming networks (OBFNs) are an interesting alternative for the design of wideband antenna arrays, mainly due to their low losses and weight, their high parallel processing capabilities and their electromagnetic immunity. Nevertheless, for a practical implementation, different technological and architectural tradeoffs need to be assessed. In this paper, the performance of an OBFN system is analytically studied and experimentally demonstrated. The study forms part of the optical beamforming network project, a multigroup research project supported by the European Space Agency (ESA). Differently from bulky free-space geometries, the architecture is based on fiber-optic delay lines for the time delays generation and on a spatial light modulator for the phase shifts generation. Experimental results for an X-band prototype are provided, showing beam steering accuracy, multibeam capability, amplitude distribution weighting and wideband operation.
27 June 2008 in IEEE Transactions on Instrumentation and Measurement
PCPatricia Ceballos Carrascosa
Patricia Ceballos Carrascosa
+1
In this paper, the capability of ultra-wideband (UWB) sensor arrays for tomographic imaging of electrically large objects in 2-D and 3-D environments is presented. One of the main concerns when imaging extended real objects is the capability of the system to correctly reconstruct the object cross-section electric properties. An imaging method using a UWB multifrequency bifocusing (UWB-MFBF) operator with good tomographic imaging capabilities is presented, and numerical simulations are conducted to obtain the basic geometry and sampling parameters for a good-quality image reconstruction for geometrical and electrical parameters. Canonical-shape experimental reconstructions are performed to validate the established criteria.
5 December 2019 in IEEE Transactions on Instrumentation and Measurement