1 December 2019 in Construction and Building Materials
1 November 2017 in Construction and Building Materials
1 January 2018 in Advances in Civil Engineering
Base isolation is a widely accepted earthquake damage prevention technique. This method decouples the superstructure from the base by putting a flexible layer under each column, thereby elongating the time period of structures. Semi‐base isolation (SBI) in double‐skin structures is an effective technique to reduce the dynamic responses of structures due to earthquake motions, by utilizing the isolation devices in part of it instead of the entire base. This study presents a double‐skin structure consisting of outer fixed base frames with shear walls that have been detached from the inner core with a minor gap. The inner core of the structure has been dissociated from the base using the elastomeric bearings. Seismic response of 10‐story double‐skin structure with inner isolated core was compared to that of inner fixed base core to consider the yielding and collapse probability of the structure using the incremental dynamic analyses (IDA). The results showed that the time period in SBI buildings can be adjusted with the use of coupling beams between the inner and outer frames. Also, the time period and interstory drift ratio are both reduced as more floors are given coupling beams. However, these coupling beams are the most effective at the topmost floors.
4 May 2020 in Journal of Geophysics and Engineering
Permeability variation in the presence of hydrates plays an important role in hydrate dissociation and may lead to extraction issues. Therefore, a wide range of pore-scale studies considering the hydrate growth habit have been conducted by various researchers. Here, we use microscopic training images of hydrate-bearing sediment to replicate the micromorphology of hydrates and coexisting hydrate growth habits (pore filling and coating) into 2D reconstruction models by multiple point statistics (MPS). Accounting for the geometric differences between each realisation and the different ratios between coating hydrate and pore-filling hydrate, permeability simulation is performed by the lattice Boltzmann Method (LBM). Results show that subtle geometric differences of hydrates may result in great changes in permeability for a given hydrate saturation for the same hydrate growth habit. The Kozeny–Carman model for single hydrate growth habit can also be used for the hydrate-bearing sediment with coexisting hydrate growth habits if the ratio of these two hydrate saturations is about 4, where the effect of coating or pore-filling hydrate can be neglected. This reconstruction model agrees well with experimental results and can be easily implemented in reservoir simulators for complex hydrate distributions.
20 March 2019 in Journal of Physics: Conference Series
This study describes a way to realistically model the internal erosion after of damage in the concrete face of a concrete face rockfill dam (CFRD). The study uses a 2D plane strain model of Tianshengqiao dam's geometry as an example, with and without consideration to erosion of the underlying cushion and transition layers. In order to accomplish this, Mazars' concrete damage model, which is a continuum damage model, was coupled with permeability relationships on the face slab; and poroelastic model was used in conjunction with Sterpi's erosion model for the underlying cushion and transition layers. Two scenarios were studied: without considering erosion and considering erosion. Results reveal that when the reservoir is linearly impounded damage in the face slab is concentrated to the lower quarter of the slab, and internal erosion will occur at the toe of the dam. After more fine particles are lost, the mechanical and hydraulic properties of the dam will change and the dam safety can be compromised.
13 January 2026 in Physical Review Materials