17 January 2017 in IET Renewable Power Generation
The brush and slip ring system is an important part of excitation system in doubly‐fed induction generators, but the excitation instability caused by the surface damage of slip ring often occurs, which brings a great security trouble to the stable operation in the generator. To solve this problem, the method that the vibration signal is used to carry out diagnosis of slip ring surface in different fault states was proposed. First, the principle based on vibration, the transmission route and failure mechanism of the slip ring were analysed. Then, the experiment platform of the brush and slip ring was set up; the real‐time vibration signal was collected before and after fault; the wavelet energy spectrum was applied to the vibration signal processing. The abnormal vibration band was found by the contrast and proportion analysis of the wavelet energy spectrum distribution of vibration signals before and after fault, which can be the basis for fault diagnosis of the slip ring device.
1 May 2021 in Chinese Journal of Electronics
We proposes an improved grasshopper algorithm for global optimization problems. Grasshopper optimization algorithm (GOA) is a recently proposed meta-heuristic algorithm inspired by the swarming behavior of grasshoppers. The original GOA has some drawbacks, such as slow convergence speed, easily falling into local optimum, and so on. To overcome these shortcomings, we proposes a grasshopper optimization algorithm based on a logistic Chaos maps opposition-based learning strategy and cloud model inertia weight (CCGOA). CCGOA is divided into three stages. The chaos opposition learning initialization strategy is used to initialize the population, so that the population can be evenly distributed in the feasible solution space as much as possible, so as to improve the uniformity and diversity of the initial population distribution of the grasshopper algorithm. The inertia weight cloud model is introduced into the grasshopper algorithm, and different inertia weight strategies are used to adjust the convergence speed of the algorithm. Based on the principle of chaotic logistic maps, local depth search is carried out to reduce the probability of falling into local optimum. Fourteen benchmark functions and an engineering example are used for simulation verification. Experimental results show that the proposed CCGOA algorithm has superior performance in determining the optimal solution of the test function problem.
18 April 2020 in Process Integration and Optimization for Sustainability
2 July 2021 in IEEE Transactions on Applied Superconductivity
The tiles burning accident may happen with the temperature rising because of the severe friction if the axial load was very big for the thrust bearing. We proposes using maglev technology to reduce the load for the thrust bearing to avoid the accident. Based on the principle of not coupling the original system, a disc electrodynamic maglev machine is designed, which will provides a normal repulsion as the levitation force to offset one part of the axial load for the bearing with the advantages of good self-stability and light secondary. The tangential force generated at the same time and is useless. The electrical and structural parameters both affect two forces. This paper studied the analytical calculation method, the relationship of the two forces, and the energies stored in the air-gap and expended in the secondary. Then the laws of parameters affecting the forces are obtained, which reveal the design method to improve the levitation force and decrease the tangential force. Based on the theoretical re-search, the Coreless superconductor primary armature is thought most suitable for this machine with higher y-axis component of magnetic field in air-gap. The FEA simulation model is used to verify the theoretical analysis.