Wookpyo Hong

Wookpyo Hong

Auto-generated profile, based on publicly available information

Wookpyo Hong

Department of Electrical Engineering and Computer Science, Washington State University, Pullman, WA 99164 USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 November 2020 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
NTNghia Tang
Nghia Tang
WHWookpyo Hong
Wookpyo Hong
BNBai Nguyen
Bai Nguyen
ZZZhiyuan Zhou
Zhiyuan Zhou
JKJong-Hoon Kim
Jong-Hoon Kim
DHDeukhyoun Heo
Deukhyoun Heo
Fully integrated voltage regulators (FIVRs) can improve the performance and reduce the power consumption of a system-on-chip (SoC) by providing point-of-load voltage regulation with dynamic voltage scaling. The desirable attributes of FIVRs include high power efficiency, high power density, and fast transient response, which are difficult to achieve due to on-chip area constraint and parasitic effects. Low-quality and low-density on-chip inductors and capacitors are currently the main performance-limiting factors. This article presents a switched-inductor-capacitor (SIC) voltage converter that can operate more efficiently with compact on-chip air-cored metal-tracked inductors than existing step-down voltage converters. The SIC converter consists of an inductor, a flying capacitor, and three power switches, and it can provide fine-grained voltage regulation by using pulsewidth-modulation (PWM) control. The unique SIC converter topology eases the on-chip inductor integration by positioning the inductor at the input power supply and reducing the current stress of the inductor. A proof-of-concept fully integrated SIC voltage regulator is fabricated in a 65-nm CMOS process, with an area of 1.3 mm x 0.5 mm excluding pads. The output voltage can be regulated from 0.6 to 0.9 V given a 1.2-V input power supply. The output voltage ripple is below 56 mV over the entire range of output voltages and load currents. The peak power efficiency is 78% at an output of 0.9 V and 406 mA. The peak power density is 730 mW/mm², and the peak current density is 820 mA/mm².

29 August 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
ZZZhiyuan Zhou
Zhiyuan Zhou
NTNghia Tang
Nghia Tang
BNBai Nguyen
Bai Nguyen
WHWookpyo Hong
Wookpyo Hong
PPPartha Pratim Pande
Partha Pratim Pande
DHDeukhyoun Heo
Deukhyoun Heo
With the increasing complexity of highly integrated system on chips (SoCs), the power management system (PMS) is required to provide several power supplies efficiently for individual blocks. This paper presents a single-inductor multiple-output (SIMO) inductor-first hybrid converter that generates three outputs between 0.4V and 1.6V from a 1.8V input. The proposed multiple-output hybrid power stage can improve the conversion efficiency by reducing inductor current while extending the output voltage range compared with the existing hybrid topologies. In addition, the proposed converter employs an on-chip switched-capacitor power stage (SCPS) with a dual-switching frequency technique, resulting in a fast response time, low cross-regulation, and reduced number of on-chip pads. Measurement results show that the converter achieves a peak efficiency of 87.5% with the maximum output current of 450mA. The converter is integrated with a fast voltage regulation loop with 500MHz system clock to achieve a less than 0.01mA/mV cross-regulation and a maximum 20mV overshoot at full-load transient response. The design is fabricated in the standard 180nm CMOS technology.

14 August 2019 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
WHWookpyo Hong
Wookpyo Hong
BNBai Nguyen
Bai Nguyen
ZZZhiyuan Zhou
Zhiyuan Zhou
NTNghia Tang
Nghia Tang
JKJonghoon Kim
Jonghoon Kim
DHDeukhyoun Heo
Deukhyoun Heo
This paper presents a dual-output switched-capacitor voltage regulator (DOSCVR) with a new flying capacitor crossing technique (FCCT) to improve power efficiency. With the FCCT, the power loss of the DOSCVR is reduced by 28%, increasing the power efficiency by 7% compared with the power efficiency of the conventional method that generates two voltages using independent single-output SCVRs. This enhanced efficiency results in no area penalty since the total flying capacitance remains unchanged. A prototype is then implemented in a 0.13-μm CMOS process to validate the proposed scheme. The prototype simultaneously produces two regulated voltages of 0.44 and 0.88 V from an input voltage of 1.5 V. The output voltages are regulated by low-bound regulation with frequency modulation. The maximum output current is 12 mA with a total flying capacitance of 0.98 nF, and the measured peak efficiency is 78%.

1 September 2020 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
WHWookpyo Hong
Wookpyo Hong
ZZZhiyuan Zhou
Zhiyuan Zhou
BNBai Nguyen
Bai Nguyen
NTNghia Tang
Nghia Tang
JKJong-Hoon Kim
Jong-Hoon Kim
DHDeukhyoun Heo
Deukhyoun Heo
This paper presents a study of compact multiple-output switched-capacitor voltage regulators (MOSCVRs). Two methods to produce multiple outputs with an SCVR and their effects on performance - power efficiency and cross-regulation, are examined with output impedance analysis. Moreover, to help a circuit designer to implement a compact MOSCVR, a design method to determine the number of outputs and their conversion ratios is also proposed in this work. To verify this method, we demonstrate the design of an example compact MOSCVR. The MOSCVR is capable of simultaneously producing four different output voltages from a single input power supply with only two flying capacitors and twelve switches. The study presented in this work provides not only comprehensive insight but also guidance to find the suitable topology of a compact MOSCVR.

12 November 2019 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
BNBai Nguyen
Bai Nguyen
NTNghia Tang
Nghia Tang
WHWookpyo Hong
Wookpyo Hong
ZZZhiyuan Zhou
Zhiyuan Zhou
DHDeukhyoun Heo
Deukhyoun Heo
This paper presents a post-regulation power management integrated circuit for energy harvesting applications. It incorporates a power budget tracking mechanism to adaptively control the power consumption of a near-threshold-voltage microcontroller based on the time-varying available input power. In addition, the proposed integrated circuit adapts the clock frequency of the microcontroller to the supply voltage under the time-varying input available power to prevent timing violations for the sequential logics of the microcontroller. A prototype shows the adaptive power budget tracking can correct timing violations with only 6.26uA quiescent current. It also properly operates sequential logic circuits at as low as 188mV supply voltage and 1.61MHz clock without interruption when powered by a solar energy harvester under the light illuminance range of 1000-6000lx. This adaptive power tracking structure enables the near-threshold-voltage microcontroller to maintain a continuous operation at optimized processing speed under the varying power condition without violating the timing requirements.