Combining a hydrophobic interaction crosslinked curdlan as the first network and hydrophobic interaction crosslinked polyacrylamide as the second network, we have fabricated a curdlan/HPAAm double network (DN) hydrogel using a one-pot method. The resulting DN hydrogel exhibited good mechanical properties, i.e. an elastic modulus of 103 kPa, a tensile fracture strength of 0.81 MPa, a tensile stretch of 25.3 and a compressive stress of 62.5 MPa when the compressive strain increased up to 99%. The DN gel could withstand ten compression tests under 90% compressive strain without observable damage. The DN gel demonstrated 84% stiffness recovery and 97% toughness recovery after the deformed samples were relaxed and stored at 95 °C for 4 h. The stiffness and fracture stress of the DN gel were enhanced after sterilization treatment at 120 °C. Furthermore, the gels exhibited 52% self-healing of fracture stretch after the samples were cut and brought into contact at 95 °C for 4 h. The self-recovery and self-healing properties of the DN gel both originated from the first curdlan network via the reformation of hydrophobic interactions and the second HPAAm network via reformation of the broken hydrophobic associations.
17 December 2014 in Chemistry – A European Journal
Hydrogels are widely used in actuators that are applied in numerous fields such as multifunctional sensors, soft robots, artificial muscles, manipulators and microfluidic valves, and yet their applications in soft robots and artificial muscles are often limited by low actuation strength and slow actuation speed. Here, we develop a hydrogel actuator with high actuation strength (contraction strength of 850 kPa), fast actuation speed (response time of 90 s) and high energy density (output working density of 72 kJ m−3) by introducing a storing–releasing elastic potential energy method into a double network hydrogel. The high actuation strength is owing to the double network hydrogel, which possesses a high elastic modulus of 1.3 MPa, fracture strength of 1.8 MPa, and fracture energy of 16 kJ m−2. The fast actuation speed is due to the storing–releasing elastic potential energy method, which stretches the hydrogel and locks the hydrogel at deformed shape under external stimuli to store the elastic potential energy and then makes the hydrogel contract rapidly under new stimuli to release the pre-stored energy. A capture actuator and a hand muscle actuator are fabricated to achieve strong and fast actuation. The hydrogel actuator has shown potential applications in soft robots and artificial muscles.
21 September 2020 in Journal of International Medical Research
Patients with non-small-cell lung cancer (NSCLC) and primary or acquired resistance do not respond to targeted drugs. We explored whether cancer cells can be cultured from liquid biopsies from patients with primary resistance to tyrosine kinase inhibitors (TKIs). We aimed to predict patients’ responses to drugs according to in vitro drug testing results. Cancer cell cultures were established from the pleural effusion of a patient with TKI-resistant NSCLC using a conditional reprogramming technique. Phenotypic drug sensitivity tests were performed using the Cell Counting Kit-8 assay. We tested individual drugs and compared the synergistic and inhibitory effects of drug combinations. The results of our in vitro sensitivity test using the combination of cisplatin and pemetrexed were correlated with the patient’s response. This represents the first successful report of predictive testing for combination therapy in patients with epidermal growth factor receptor-mutant NSCLC and primary TKI resistance. This strategy should be applicable to both chemotherapies and targeted therapies, and it will significantly improve the clinical treatment and management of patients with NSCLC and primary or acquired resistance to targeted therapies, as well as patients lacking targetable mutations.