A 60-GHz compact dual-mode on-chip bandpass filter (BPF) is presented using gallium arsenide (GaAs) technology. To demonstrate the working mechanism of the proposed BPF, an LC equivalent circuit model is conceived and analyzed for further investigation of the transmission poles and zeros. Finally, a prototype of the BPF is fabricated and tested to validate the proposed idea, whose simulated and measured results are in good agreement. The measurements show that it has a center frequency of 58.7 GHz with a bandwidth of 18.4%, and the minimum insertion loss within the passband is 2.42 dB. The chip size, excluding the feedings, is about 0.158 mm ×0.344 mm.
2 July 2019 in IEEE Transactions on Microwave Theory and Techniques
A synthesis theory of ultra-wideband (UWB) bandpass (BP) transformer with short-circuited stubs is proposed in this paper. Based on the short-circuited stub number and their positions, six combination topologies are presented when the transmission line (TL) section is fixed to 4. Although analyzing the characteristic functions of these six combination topologies, the same theoretical Chebyshev transfer function can be summarized. Therefore, by selecting different short-circuited stub number and their positions, we can make a flexible choice of the filtering transformer pattern and keep the Chebyshev response at the same time. Finally, by using the proposed transformer, a UWB BP type Wilkinson power divider can be easily designed. In order to match the numbers and frequencies of output ports reflection zeroes (S₂₂ =0)/isolation zeroes (S₃₂ = 0) with those of input port reflection zeroes (S₁₁ =0), one extra TL and one isolation resistor are newly added in the power divider design. One experimental circuit is fabricated, and its measured frequency response verified well the proposed design theory and method.
3 August 2020 in IEEE Microwave and Wireless Components Letters
In this letter, an ultrawideband (UWB) bandpass Wilkinson power divider (WPD) is introduced. By using filter synthesis theory and proposed optimization algorithm, all the S-parameters (S₁₁, S₂₁ = S₃₁, S₂₂ = S₃₃ and S₃₂) of the proposed topology could provide an equal-ripple response, and their equal-ripple level and bandwidth can be controlled, respectively. For verification purposes, a prototype UWB WPD has been simulated, fabricated, and measured. The measured and simulated results are matched reasonably well.
1 March 2021 in IEEE Microwave and Wireless Components Letters
This letter proposes a novel fine-tuning approach of microstrip bandpass filters (BPFs) with a deep Q-network (DQN). In conventional works, reinforcement learning using DQN has been investigated for the automation of screw tuning in cavity BPFs. However, cross couplings appearing in planar BPF require a more complicated tuning process. To consider all the cross couplings, the proposed method introduces two neural-network-based surrogate models expressing the relationship between a coupling matrix and structural parameters. The two models also enable to drastically speed up reinforcement learning. As an example, a DQN is constructed for the design of the fifth-order microstrip BPF. The effectiveness of the DQN is numerically demonstrated through successful structural adjustments.
1 June 2007 in IEEE/MTT-S International Microwave Symposium
A novel compact ultra-wideband (UWB) bandpass filter (BPF) using a microstrip stepped-impedance four-modes resonator is developed in this paper. By controlling the resonant frequencies of the first four modes of the resonator, we get four transmission poles within the passband of the filter. Moreover, by enhancing the coupling between the resonator and the input/output feed lines, we obtain two additional transmission poles. As a consequence, we realize a UWB bandpass filter that has six transmission poles in its passband, although only one resonator is utilized. A design method, based on network analysis and optimization in the z-domain, is established to determine the circuit and geometrical parameters of the filter. The measured filtering characteristics of the filter show good agreement with the theoretical predictions and satisfy well the Federal Communications Commission's indoor limit.
8 December 2020 in IEEE Transactions on Microwave Theory and Techniques
This article discusses the synthesis of a new class of cross-coupled blocks incorporating frequency-variant couplings, that is, the frequency-variant blocks (FVBs), and their planar implementations based on an analytical approach. The proposed FVBs require fewer coupling elements with regard to traditional blocks, while can realize a quasi-canonical characteristic (i.e., realizing k-1 transmission zeros for a block of kth order). Derivation of the FVBs relies on a uniform synthesis process, where each transformation is mathematically simplified as a non-reciprocal matrix. An Nth-order quasi-canonical filter (possessing either symmetric or asymmetric TZs) can thereafter be synthesized by properly cascading the FVBs. Moreover, a unique planar technique is introduced to construct the quasi-canonical filters (with TZs above passband) using parallel-coupled microstrips, where a complete design procedure from synthesis to circuit parameters will be given. Validity of this work is eventually demonstrated by three illustrative examples, whose synthesis, simulation, and test results perform desired responses and are well-matched with each other.