21 June 2021 in IEEE Electron Device Letters
A 60-GHz compact dual-mode on-chip bandpass filter (BPF) is presented using gallium arsenide (GaAs) technology. To demonstrate the working mechanism of the proposed BPF, an LC equivalent circuit model is conceived and analyzed for further investigation of the transmission poles and zeros. Finally, a prototype of the BPF is fabricated and tested to validate the proposed idea, whose simulated and measured results are in good agreement. The measurements show that it has a center frequency of 58.7 GHz with a bandwidth of 18.4%, and the minimum insertion loss within the passband is 2.42 dB. The chip size, excluding the feedings, is about 0.158 mm ×0.344 mm.
17 August 2022 in IEEE Transactions on Microwave Theory and Techniques
A class of millimeter-wave E-plane waveguide bandpass filters (BPFs) based on spoof surface plasmon polaritons (SSPPs) have been presented in this article. Three kinds of SSPPs, with different patterns coated on the dielectric substrate, are inserted into the E-plane of WR-10 standard rectangular waveguide for the design of BPFs. To clarify the filtering characteristics of the proposed BPFs, the dispersive properties of different SSPP unit cells are investigated and discussed. The electromagnetic simulation results demonstrate that the bandwidths and center frequencies of the proposed E-plane waveguide BPFs can be flexibly adjusted by controlling the asymptotic frequencies of SSPP unit cells. For verifying the design feasibility, these three E-plane waveguide BPFs are fabricated and measured. Good agreement between measurements and simulations indicates that the proposed idea will be a good candidate for the BPF design with low insertion loss and flexible adjustment of center frequency and bandwidth.
22 December 2020 in IEEE Transactions on Plasma Science
A bandpass filter (BPF) with a notched band is designed based on the high-order mode of spoof surface plasmon polaritons (SSPPs). The high-efficiency passband is developed from the first high-order mode (Mode 1) of SSPPs. Compared with the fundamental mode having low-pass response, the Mode 1 has the inherent bandpass response; thus, the BPF generated by Mode 1 does not need to add an additional high-pass filtering structure and employ a gradient transition structure for excitation. The Mode 1 of SSPPs can be effectively excited just with a simple trapezoidal transition converting the signals from microstrip line to SSPP waveguide. Moreover, by embedding a U-shaped resonator into the SSPP structure, a BPF with a notched band is constructed, where the location of the notched band will be red-shifted as the length of resonator increases. The measurements of two fabricated prototypes agree with the simulated ones, which verify the feasibility of our design.
4 March 2021 in IEEE Photonics Technology Letters
In this letter, high-order mode dispersion of a novel spoof surface plasmon polariton (SSPP) unit cell is reported, which has excellent bandpass propagation feature. Its asymptotic frequency and intersection frequency with light line can be independently manipulated by changing the geometric parameters of the slot in proposed SSPP unit cell. In order to validate the feasibility of high-order mode of SSPPs applied in the design of bandpass filters, two SSPP waveguides based on the method with different bandwidths are fabricated and measured. No mode-conversion transition part is introduced in the procedure of waveguide design which avoids extra addition of layout area and reduces complexity of devices. The measurements show that the proposed SSPP waveguide based on high-order mode characteristics can achieve bandpass signal propagation smoothly with controllable bandwidth.
27 January 2021 in IEEE Photonics Technology Letters
In this letter, a GaAs-based wideband spoof surface plasmon polariton (SSPP) waveguide with super compact size is presented at millimeter-wave regime. The periodic SSPP unit cell consists of a longitudinal slot and a meander slot in transversal direction, and its corresponding waveguide has good low-pass filtering feature. The momentum of microstrip line for measurement feeding to the SSPPs can be well matched without any gradient transition structures. To apply this SSPP waveguide into the design of bandpass filter (BPF), a row of vias is added with a certain distance from the SSPP unit cells. For demonstration, two on-chip examples, i.e., SSPP waveguide and SSPP-based BPF, are fabricated operating at different frequencies. Good agreement between simulations and measurements validates the propagation characteristics and implementation of the proposed SSPPs.
6 February 2019 in Optics Express
Terahertz (THz) broadband spoof surface plasmon polaritons (SSPPs) using new structure of ultra-compact split-ring grooves are proposed. The high-order mode propagation is highly concentrated around the proposed structure with lower radiation loss implying improved operating bandwidth. More importantly, a size reduction of 83.5% can be realized as compared to the traditional grounded SSPP structure with the same high-order asymptotic frequency. To further verify the proposed idea, a similar structure in microwave regime is designed and measured, where the excitation is easily achieved by directly connecting the microstrip line to the proposed SSPP waveguide. The gradient transition section, such as flaring ground, can be avoided, which decreases the waveguide’s longitudinal and transversal lengths and simplifies the design procedure. The measured results of the microwave prototype illustrate that it has good lowpass filtering performance, in which the reflection coefficient is better than −10 dB up to 13 GHz, with the smallest and worst insertion losses of 0.5 dB and 4.5 dB, respectively. To the best of the authors’ knowledge, this work presents THz high-order broadband SSPP propagation for the first time, having significant potential for plasmonic integrated circuits application at microwave/THz frequencies.