1 July 2016 in Materials Science and Engineering: A
1 September 2017 in Surface and Coatings Technology
1 May 2019 in Scripta Materialia
6 March 2019 in Modelling and Simulation in Materials Science and Engineering
Four different models (corresponding to different loading conditions) of first principles tensile tests are employed to determine cohesion and strength of several interfaces, namely coherent interfaces of two fcc metals (Ni/Ag and Ni/Cu) and symmetrical tilted Σ5(210) grain boundary in fcc nickel (clean as well as sulfur-decorated). The purpose of this study is to compare the selected models of tensile tests and to critically discuss their advantages and limitations. Particular attention is paid to differences in their predictions, their ability to identify the weakest link in the studied system and the supercell-size convergence of the computed data. Selection of an appropriate model can be the crucial point in a computer assisted design of advanced materials with interfaces such as multilayered systems.
13 December 2012 in Journal of Physics: Condensed Matter
The response of three covalent crystals with a diamond lattice (C, Si and Ge) to uniaxial and a special triaxial (generally nonhydrostatic) loading is calculated from first principles. The lattice deformations are described in terms of variations of bond lengths and angles. The triaxial stress state is simulated as a superposition of axial tension or compression and transverse (both tensile and compressive) biaxial stresses. The biaxial stresses are considered to be adjustable parameters and the theoretical strengths in tension and compression along < 100 >, < 110 >, < 111 > crystallographic directions are calculated as their functions. The obtained results revealed that the compressive strengths are, consistently to fcc metals, almost linear functions of the transverse stresses. Tensile transverse stresses lower the compressive strength and vice versa. The tensile strengths, however, are not monotonic functions of the transverse biaxial stresses since they mostly exhibit maxima for certain values of the transverse stresses (e. g., tensile for < 100 > and < 110 > loading of Si and Ge or compressive for < 100 > loading of C).
30 January 2017 in Journal of Materials Science