Xin Jin

Xin Jin

Auto-generated profile, based on publicly available information

Xin Jin

Department of Civil Engineering, Xi’an Technological University, Xi’an 710021, China

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 August 2013 in Traffic Injury Prevention
Verified
Journal Article
Closed access
ZHZHAO Hui
ZHAO Hui
GYGuang-Yu Yang
Guang-Yu Yang
Feng ZhuFeng Zhu
Feng Zhu
XJXin Jin
Xin Jin
PBPaul Begeman
Paul Begeman
ZWZhengguo Wang
Zhengguo Wang
Objective: To investigate the relative likelihood of pedestrian head injuries based on person, vehicular, and environmental factors in China. Methods: A team was established to collect passenger car–pedestrian accident cases occurring between 2006 and 2011 in Beijing, Shanxi Province, and Chongqing, China. Some key variables for person-, vehicle-, and environment-related factors on head injuries were analyzed using multivariate logistic regression analysis to determine relative risk/likelihood. Pedestrians were classified according to injury outcome and age. Pedestrian head injuries were scored using the Abbreviated Injury Scale (AIS). Results: A total of 285 vehicle–pedestrian crashes were collected and analyzed: 30 in Beijing, 20 in Shanxi Province, and 235 in Chongqing. The distribution in age and road type by study location differed. The injury outcome, head injury severity, and head contact site were different among 4 age groups. The variables including head contact site and impact speed were the common determinants for head injury severity. A higher pedestrian fatality risk was associated with age over 46, impact speeds over 40 km/h, and higher likelihoods of the victim's head striking the windscreen frame/A pillar and of the victim sustaining a head injury. Similarly, a higher risk of head injury was associated with being female, age over 60, impact speeds over 40 km/h, and a likelihood of the victim's head striking the vehicle rather than the ground. Impact speeds of over 40 km/h and head contact site on windscreen frame/A pillar retained a strong association with severe head injury (AIS 5–6) rate. Conclusions: Pedestrian age, vehicle impact speed, and head contact site were common pertinent factors for the risk of pedestrian head injury and the risk of death. Further studies would be valuable to fully characterize vehicle–pedestrian crashes in China and to develop targeted injury prevention strategies based on surveillance results. Supplemental materials are available for this article. Go to the publisher's online edition of Traffic Injury Prevention to view the supplemental file.

1 August 2021 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
ZZZai-Kun Zhao
Zai-Kun Zhao
TWTie-Hang Wang
Tie-Hang Wang
XJXin Jin
Xin Jin
Pressure grouting method can significantly enhance the strength of soil, and is widely used in foundation reinforcement. There already have some theoretical studies on pressure grouting, but the actual diffusion process of grouting can not be reflected exactly. Firstly, this paper conducts a field permeation grouting test on undisturbed loess of late pleistocene of quaternary, and acquires the pressure effected relationships of quantity vs. time. The test reveals that the grout quantity approximately increases linearly with the pressure until a certain grouting time point. The time point increases with grouting pressure and we try to define the pressure effected time point as the effective grouting time. After the effective grouting time, the grouting quantity remains constant due to the approaching of max migration radius and the stopping of grout migration. And then, considering the piston-like displacement effect of grout on porous mediums due to pressure, this study introduced the effective grouting time into the theoretical derivation process based on porous mediums’ fluid percolation pore pressure equation and Darcy’s law. The author combined the initial conditions and boundary conditions of pore pressure with the continuity conditions of permeation velocity, and performed the Boltzmann’s transformation and reduced-order processing to derive the equation for the migration velocity of the grout front and the migration radius of grout. Finally, by substituting the effective grouting time and the effective grouting quantity into the equation, we could obtain the grouting reinforcement radius. The equation can accurately predict the actual grouting reinforcement radius, and the applicability of the equation is verified by verification test.

22 August 2023 in Buildings
Verified
Journal Article
Open access
PDF file
LZLiang Zhang
Liang Zhang
TWTiehang Wang
Tiehang Wang
ZZZaikun Zhao
Zaikun Zhao
XJXin Jin
Xin Jin
The reliability of high-rise buildings’ rigid-pile composite foundations primarily relies on the load test results of single-pile composite foundations. Field load tests were conducted for a high-rise building in the loess area of China, the results conformed to the design requirements. Nevertheless, the buildings experienced significant settlement after construction, which was quite different from the test results. Investigating bearing disparities between the single-pile and group-pile composite foundations in high-rise structures was necessary. Firstly, conducting an indoor interface shear test to propose a pile–soil hyperbolic contact model and integrate it into the numerical model. Subsequently, a finite element model was employed that accounts for pile–soil interactions in order to analyze discrepancies in bearing. The results show that the settlement difference rises by 56.4% as the load escalates by 100 kPa from the initial level and increases by 28.9% as the load ascends by 100 kPa to the final level. The settlement difference changes with an increasing load in a hardened curve pattern. Furthermore, differences in pile bearing characteristics and pile–soil interaction were analyzed. Negative friction occurs within 1/4 of the pile length within group-pile composite foundations, while in single-pile composite foundations, the range contracts to 1/10.

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
YNYa-Lin Nan
Ya-Lin Nan
ZZZai-Kun Zhao
Zai-Kun Zhao
XJXin Jin
Xin Jin
LZLiang Zhang
Liang Zhang
XZXiao-Xuan Zhu
Xiao-Xuan Zhu
ZLZe-Jun Liu
Ze-Jun Liu
Water migration changes the water distribution of loess and significantly affects the engineering properties of loess. However, because of the characteristics of loess such as water sensitivity and special structure, it is still difficult to understand the water migration trend of loess. The objectives of this study are to investigate the water diffusion coefficient and soil‐water characteristic curve (SWCC) of loess, focusing on the effect of temperature and density, and establish a mixed migration equation for gaseous and liquid water to develop a new calculation method of loess water migration. The results show that the density of loess with larger liquid water content has a more significant effect on the diffusion coefficient than that of less liquid water content. Furthermore, the density significantly affects the matric suction of unsaturated loess, while the temperature change at normal temperature has slight effect. Based on the data obtained in this study, the soil water permeability coefficient was obtained. Moreover, considering the characteristics of mixed migration of gas and liquid water in unsaturated loess, an equation was derived for the gas‐liquid water transfer in unsaturated loess. The calculation results are consistent with the experimental results of water migration experiment. Based on the calculation results of water migration, the trend of water migration and proportion of gaseous water during migration were analyzed.

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
MZMeng Zhang
Meng Zhang
HHHui He
Hui He
XJXin Jin
Xin Jin
YQyonglong Qu
yonglong Qu
HGHongjun Guo
Hongjun Guo
The research on the key factors of surface subsidence in paste backfilling mining of thick coal seam in deep mine is a complex system engineering, which involves mining, backfilling, support, subsidence, safety, and other aspects. At present, there is no systematic research on the key factors of surface subsidence in paste backfilling mining of thick coal seam more than 6 meters in a deep mine. In this paper, field research, laboratory experiments, theoretical analysis, and other research methods are used to carry out the research about 3# coal seam under buildings in the Lu’an area. The main conclusions are as follows: through the construction of the fuzzy extension model of surface subsidence in paste backfilling mining, five types of surface subsidence are obtained, including overburden structure, roof subsidence before backfilling, nonbackfilling account, the strength of filling body, and backfilling technology. It is the key factor to control the surface subsidence; the optimization measures are given to provide a reference for the reasonable design of paste backfilling mining in other working faces. The research conclusion has a certain reference value for solving a series of problems such as coal resources under buildings, solid waste disposal, controlling strata and surface movement, improving the recovery rate of mine resources, and extending the service life of mine.

29 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
XJXin Jin
Xin Jin
TWTie-Hang Wang
Tie-Hang Wang
ZZZai-Kun Zhao
Zai-Kun Zhao
LZLiang Zhang
Liang Zhang
YHYan-Zhou Hao
Yan-Zhou Hao
Collapsible loess is generally characterized by a sudden and substantial decrease in volume that occurs when is applied under constant stress. To evaluate the loess collapse potential, the self‐weight collapse and collapse coefficients have been defined by the code for building construction in collapsible loess regions. However, the method in the code does not account for the vertical stress variation. The loess collapse process commonly occurs with stress variation in practice. This paper documents a low‐cost, quantitative evaluation scheme using regression analysis to evaluate the loess collapse potential by varying the unloading levels. The results show that the factors that prominently account for loess collapse deformation are the initial pressure, unloading ratio, and collapse completed‐ratio. At a constant collapse‐completed ratio, the remnant collapse coefficient significantly decreases with the decreasing unloading ratio; at a constant unloading ratio, the remnant collapse coefficient increases with a decreasing collapse‐completed ratio. Decreasing unloading and collapse‐completed ratios decreased the loess collapse potential with an initial pressure that exceeds the threshold value. Finally, an unloading collapse deformation calculation of loess was prepared to analyze practical project problems of loess based on the unloading collapse test.