20 July 2020 in IEEE Transactions on Instrumentation and Measurement
This paper presents a multistage SSA method to denoise a signal efficiently and adaptively. The multistage SSA is to apply basic SSA recursively toward the noisy signal. Therefore, the noise dominated components will be extracted out from the noisy signal stage by stage. However, the denoised signal is still noisy if the number of stages is small. On the other hand, after all the noise dominated components have been extracted out by enough number of stages, some signal dominated components begin to be moved into the noise group as the multistage SSA based denoising proceeds. An adaptive criterion based on correlation measure is proposed to terminate the multistage SSA based denoising algorithm in order to prevent moving the signal dominated components into the noise group. The multistage SSA based denoising algorithm is efficient since the window length is selected as a small positive integer in every stage. Also, the adaptive stop criterion makes the proposed method avoid inappropriate parameter selection effectively. Computer numerical simulation results show that the proposed method has better denoising performance towards different test signals under different noise levels as well as needs less processing time when compared to the conventional SSA denoising method.
30 April 2007 in IEEE Microwave and Wireless Components Letters
A coaxial Bragg reflector is suggested for the application in the cyclotron autoresonance masers (CARMs), where both the outer wall and inner rod are corrugated with weak axisymmetric-sinusoidal-ripple, and a concept design is presented. It is found that, compared to the cylindrical Bragg reflector, the coaxial Bragg reflector has larger dimensional size, narrower bandwidth, and larger eigenvalue intervals. These peculiarities are favorable to the mode selectivity, the ability of dissipating the ohmic heat on the wall, the oscillating startup of the operating mode, and machining manufacture, and therefore, this new kind of Bragg reflector can be developed into a coaxial resonator for the high-power CARMs
14 March 2024 in IEEE Access
In this paper, a compact endfire antenna array with low-profile, small clearance, and wideband operation is proposed for millimeter-wave (mmWave) fifth-generation (5G) mobile terminals. The wideband operation is achieved by exciting two identical bow-tie dipoles inserted on both sides of a multilayer substrate fed by an asymmetric open-end stripline to slotline transition. The antenna performance is significantly improved by introducing a set of vertical metallic vias. The proposed antenna element can achieve 29 % from 24.2 GHz to 32.4 GHz with a peak realized gain that varies from 3.5 dBi to 4.5 dBi. A linear 4-element antenna array is arranged and fabricated to verify the proposed antenna beamforming capabilities. The simulated and measured bandwidth achieves a wide range of 34.4 % (24-34 GHz) to support 26, 28, and 30 GHz 5G mmWave bands with an isolation level better than 20 dB and a peak realized gain over the interested bands ranging from 7.56 to 8.14 dBi. The simulated array scanning angle is ±68° at 28 GHz within 3-dB gain deterioration. Furthermore, the simulated spherical coverage has met the requirements of 3GPP standards which make the proposed antenna array a promising candidate to be integrated within mmWave 5G mobile devices.
6 May 2005 in Journal of Physics D: Applied Physics
A self-consistent nonlinear theory for the outer-slotted-coaxial-waveguide cyclotron autoresonance maser (CARM) amplifier is presented, which includes the characteristic equation of the wave, coupling equation of the wave with the relativistic electron beam and the simulation model. The influences of the magnetic field, the slot depth and width are investigated. The interesting characteristic of the device is that the mode competition can be efficiently suppressed by slotting the outer wall of the coaxial waveguide. A typical example is given by the theoretical design of a 137 GHz outer-slotted-coaxial-waveguide CARM amplifier by utilizing an electron beam with a voltage of 90 kV, current of 50 A, velocity pitch angle of 0.85 and a magnetic field of 43.0 kG. The nonlinear simulation predicts a power of 467.9 kW, an electronic efficiency of 10.4% and a saturated gain of 46.7 dB, if the electron beam has no velocity spread. However, the axial velocity spread deteriorates the device; for example, if the axial velocity spread is 2%, the peak power decreases to 332.4 kW with an efficiency of 7.4% and a saturated gain of 45.22 dB. Simulation shows that the efficiency of the outer-slotted-coaxial-waveguide CARM amplifier may be increased from 10.4% to 29.6% by tapering the magnetic field.
1 September 2018 in Physics of Plasmas
Making use of field expansion and the equivalent boundary, an analytical model is set up to describe the multi-mode intercoupling in two-dimensional coaxial Bragg structures with either one or both of the conductors corrugated with helical ripples. The coupled-mode equations and the explicit formulae of the coupling coefficients for all possible mode combinations are derived, and the general mode coupling rules are discussed. Based on the analytical model, the dependence of the coupling coefficients on structural parameters of the two-dimensional coaxial Bragg structures with overmoded operation is investigated by numerical calculation. The results show that the additional conductor provides more flexibility for adjustment of coupling coefficients compared with other types of two-dimensional Bragg structures with a single conductor. Taking advantage of this feature, a two-dimensional coaxial Bragg structure can provide strong reflection with high mode purity under overmoded operation by suppressing the parasitic coupling using an optimized combination of corrugated outer and inner conductors. In this way, the structure has potential applications in the design of high-Q improved Bragg resonators for high-power microwave oscillators operating in the millimeter wave or terahertz range.