This study discusses the behavior of ambient-cured circular geopolymer concrete specimens tested under different loading conditions. Twelve specimens were cast and tested to investigate the influence of the type of the reinforcement, that is, steel and glass fiber-reinforced polymer (GFRP), the pitch of the transverse reinforcement, and loading conditions (concentric axial load, 15 and 35 mm eccentric load, and four-point bending). The axial load carrying capacity, confinement efficiency, and deformability of the specimens decreased for the replacement of the steel reinforcement with the same amount of GFRP reinforcement under concentric and eccentric loads. However, the deformability of the GFRP reinforced concrete (RC) specimen was higher than the deformability of its steel counterpart specimen under four-point bending. Overall, the reduction in the pitch of the GFRP helices in the GFRP-RC specimens resulted in a significant improvement in the confinement efficiency, deformability, postpeak behavior, and the axial load–bending moment capacity of the specimens under different loading conditions. Moreover, theoretical equations based on the confinement pressure of transverse reinforcement provide accurate predictions of the theoretical load-carrying capacity of the columns reinforced with GFRP bars and helices.
This study presents new neural‐network (NN)‐based models to predict the axial load‐carrying capacities of fiber‐reinforced polymer (FRP) bar reinforced‐concrete (RC) circular columns. A database of FRP‐reinforced concrete (RC) circular columns having outside diameter and height ranged between 160–305 and 640–2500 mm, respectively was established from the literature. The axial load‐carrying capacities of FRP‐RC columns were first predicted using the empirical models developed in the literature and then predicted using deep neural‐network (DNN) and convolutional neural‐network (CNN)‐based models. The developed DNN and CNN models were calibrated using various neurons integrated in the hidden layers for the accurate predictions. Based on the results, the proposed DNN and CNN models accurately predicted the axial load‐carrying capacities of FRP‐RC circular columns with R2 = 0.943 and R2 = 0.936, respectively. Further, a comparative analysis showed that the proposed DNN and CNN models are more accurate than the empirical models with 52% and 42% reduction in mean absolute percentage error (MAPE) and root mean square error (RMSE), respectively involved in the empirical models. Moreover, within NN‐based prediction models, the prediction accuracy of DNN model is comparatively higher than the CNN model due to the integration of neurons in each layer (9‐64‐64‐64‐64‐1) and embedded rectified linear unit (ReLu) activation function. Overall, the proposed DNN and CNN models can be utilized as paramount in the future studies.