1 April 2021 in Construction and Building Materials
1 June 2019 in Engineering Structures
28 April 2023 in Construction and Building Materials
15 January 2019 in Nondestructive Testing and Evaluation
Cemented gangue-fly ash backfill material (CGFBM) is made of coal gangue, fly ash, cementation materials and additives. It has been widely used in the field of backfill mining to control surface subsidence and to protect the environment. Partial backfill mining technology attracts much attention for its lower cost, and a large number of unconfined backfill structures (UBS) are formed based on it. Aimed at the stability monitoring of UBS in partial backfill, the failure progress of the CGFBM were obtained by uniaxial compression tests. The ‘optical-acoustic-stress’ responses of the specimens were monitored by Digital Image Correlation (DIC) technique, Acoustic Emission (AE) technique, Ultrasonic Testing (UT) technique and embedded pressure sensors. The advantages of each method in the stability monitoring of UBS was discussed. It is found that different monitoring methods have different sensitivity to different failure characteristics. The AE ringing count signal response is more sensitive to the pore compression and micro-crack generation in initial compaction stage and elastic compression stage. The central stress can be used to acquire the bearing capacity of the core bearing area after the top stress. The DIC response and UT response can be used to quantitatively evaluate the damage degree of the specimen. The stability of the UBS can be monitored by the jointly methods of ‘optical-acoustic-stress’ in partial backfill mining.
11 October 2022 in International Journal of Mining Science and Technology
1 January 2020 in Advances in Materials Science and Engineering
To reduce the amount of cement used in cemented coal gangue backfill (CCGB, a mixture of coal gangue, cement, fly ash, and water), mechanical and deformation properties of CCGB in which CSFA partially replaces the cement (0, 10, 20, 30, and 40 wt%) were studied. Compressive strength, acoustic emission during uniaxial loading, shear strength, and drying shrinkage were analysed. The compressive strength, shear strength, and drying shrinkage tests were performed at different curing times. The results showed that cemented coal gangue and corn stalk fly ash backfill (CGCAB) presented better performance, and the CGCAB with a 20% substitution rate had the best performance at day 28. Despite having the largest drying shrinkage value, 20% is the best choice for the substitution rate of CSFA. A 20% CSFA addition can enhance the bearing capacity of CGCAB and improve its failure mode, which is of great significance to support the upper overburden load and maintain the surface stability of the goaf.